Re: [PATCH v5 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-08-10 09:38, Prasad Malisetty wrote:
On the SC7280, By default the clock source for pcie_1_pipe is
TCXO for gdsc enable. But after the PHY is initialized, the clock
source must be switched to gcc_pcie_1_pipe_clk from TCXO.

Signed-off-by: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
b/drivers/pci/controller/dwc/pcie-qcom.c
index 8a7a300..39e3b21 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -166,6 +166,8 @@ struct qcom_pcie_resources_2_7_0 {
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
 	struct clk *pipe_clk;
+	struct clk *gcc_pcie_1_pipe_clk_src;
+	struct clk *phy_pipe_clk;
 };

 union qcom_pcie_resources {
@@ -1167,6 +1169,16 @@ static int qcom_pcie_get_resources_2_7_0(struct
qcom_pcie *pcie)
 	if (ret < 0)
 		return ret;

+	if (of_device_is_compatible(dev->of_node, "qcom,pcie-sc7280")) {
+		res->gcc_pcie_1_pipe_clk_src = devm_clk_get(dev, "pipe_mux");
+		if (IS_ERR(res->gcc_pcie_1_pipe_clk_src))
+			return PTR_ERR(res->gcc_pcie_1_pipe_clk_src);
+
+		res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
+		if (IS_ERR(res->phy_pipe_clk))
+			return PTR_ERR(res->phy_pipe_clk);
+	}
+

Hi All,

Greetings!

I would like to check is there any other better approach instead of compatible method here as well or is it fine to use compatible method.

Thanks
-Prasad

 	res->pipe_clk = devm_clk_get(dev, "pipe");
 	return PTR_ERR_OR_ZERO(res->pipe_clk);
 }
@@ -1255,6 +1267,12 @@ static void qcom_pcie_deinit_2_7_0(struct
qcom_pcie *pcie)
 static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
+	struct dw_pcie *pci = pcie->pci;
+	struct device *dev = pci->dev;
+	struct device_node *node = dev->of_node;
+
+	if (of_property_read_bool(node, "pipe-clk-source-switch"))
+		clk_set_parent(res->gcc_pcie_1_pipe_clk_src, res->phy_pipe_clk);

 	return clk_prepare_enable(res->pipe_clk);
 }



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux