Re: [PATCH v3 1/5] dt-bindings: leds: Add binding for qcom-spmi-flash

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 03, 2021 at 01:26:37PM -0300, Nícolas F. R. A. Prado wrote:
> Add devicetree binding for Qualcomm's SPMI Flash LEDs which are part of
> the PM8941 PMIC. These LEDs are used both as lantern and camera flash on
> phones based on the MSM8974 SoC, like the Nexus 5.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
> ---
> 
> Changes in v3:
> - Removed clamp-curr, headroom, startup-dly and safety-timer properties since
>   they didn't impact the behavior. They're now hardcoded in the driver (patch 2)
> - Added valid ranges for led-max-microamp, flash-max-microamp and
>   flash-max-timeout-us
> - Removed dt-bindings header file that held some constants (moved to inside the
>   driver in patch 2)
> 
> Added in v2
> 
>  .../bindings/leds/leds-qcom-spmi-flash.yaml   | 93 +++++++++++++++++++
>  1 file changed, 93 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-spmi-flash.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-spmi-flash.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-spmi-flash.yaml
> new file mode 100644
> index 000000000000..da674d73c033
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-qcom-spmi-flash.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-qcom-spmi-flash.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SPMI Flash LEDs
> +
> +maintainers:
> +  - Nícolas F. R. A. Prado <n@xxxxxxxxxxxxx>
> +
> +description: |
> +  The Qualcomm SPMI Flash LEDs are part of Qualcomm PMICs and are used primarily
> +  as a camera or video flash. They can also be used as a lantern when on torch
> +  mode.
> +  The PMIC is connected to Host processor via SPMI bus.
> +
> +properties:
> +  compatible:
> +    const: qcom,spmi-flash-leds
> +
> +  reg:
> +    maxItems: 1
> +
> +  flash-boost-supply:
> +    description: SMBB regulator for LED flash mode
> +
> +  torch-boost-supply:
> +    description: SMBB regulator for LED torch mode
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +patternProperties:
> +  "^led@[0-1]$":
> +    type: object
> +    $ref: common.yaml#
> +
> +    properties:
> +      reg:
> +        maxItems: 1

Instead of maxItems, this would be a bit more specific:

enum: [ 0, 1 ]

With that,

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

> +
> +      led-max-microamp:
> +        minimum: 12500
> +        maximum: 200000
> +        multipleOf: 12500
> +
> +      flash-max-microamp:
> +        minimum: 12500
> +        maximum: 1000000
> +        multipleOf: 12500
> +
> +      flash-max-timeout-us:
> +        minimum: 10000
> +        maximum: 1280000
> +        multipleOf: 10000
> +
> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +  - reg
> +  - flash-boost-supply
> +  - torch-boost-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/leds/common.h>
> +
> +    spmi-flash-leds@d300 {
> +        compatible = "qcom,spmi-flash-leds";
> +        reg = <0xd300 0x100>;
> +        flash-boost-supply = <&pm8941_5vs1>;
> +        torch-boost-supply = <&pm8941_5v>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        led@0 {
> +            reg = <0>;
> +            function = LED_FUNCTION_FLASH;
> +            color = <LED_COLOR_ID_WHITE>;
> +            led-max-microamp = <200000>;
> +            flash-max-microamp = <1000000>;
> +            flash-max-timeout-us = <1280000>;
> +        };
> +    };
> +...
> -- 
> 2.32.0
> 
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux