Add interconnect providers for the multiple NoCs available on the platform, and assign interconnects used by some blocks. Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 84 +++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 017c94e88c21..85055b9dd086 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/qcom,mmcc-msm8996.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/interconnect/qcom,msm8996.h> #include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> @@ -47,6 +48,7 @@ CPU0: cpu@0 { capacity-dmips-mhz = <1024>; clocks = <&kryocc 0>; operating-points-v2 = <&cluster0_opp>; + interconnects = <&bimc MASTER_AMPSS_M0 &bimc SLAVE_EBI_CH0>; #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { @@ -64,6 +66,7 @@ CPU1: cpu@1 { capacity-dmips-mhz = <1024>; clocks = <&kryocc 0>; operating-points-v2 = <&cluster0_opp>; + interconnects = <&bimc MASTER_AMPSS_M0 &bimc SLAVE_EBI_CH0>; #cooling-cells = <2>; next-level-cache = <&L2_0>; }; @@ -77,6 +80,7 @@ CPU2: cpu@100 { capacity-dmips-mhz = <1024>; clocks = <&kryocc 1>; operating-points-v2 = <&cluster1_opp>; + interconnects = <&bimc MASTER_AMPSS_M0 &bimc SLAVE_EBI_CH0>; #cooling-cells = <2>; next-level-cache = <&L2_1>; L2_1: l2-cache { @@ -94,6 +98,7 @@ CPU3: cpu@101 { capacity-dmips-mhz = <1024>; clocks = <&kryocc 1>; operating-points-v2 = <&cluster1_opp>; + interconnects = <&bimc MASTER_AMPSS_M0 &bimc SLAVE_EBI_CH0>; #cooling-cells = <2>; next-level-cache = <&L2_1>; }; @@ -904,6 +909,15 @@ gcc: clock-controller@300000 { clock-names = "cxo2"; }; + bimc: interconnect@408000 { + compatible = "qcom,msm8996-bimc"; + reg = <0x00408000 0x5a000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + tsens0: thermal-sensor@4a9000 { compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; reg = <0x004a9000 0x1000>, /* TM */ @@ -926,6 +940,61 @@ tsens1: thermal-sensor@4ad000 { #thermal-sensor-cells = <1>; }; + cnoc: interconnect@500000 { + compatible = "qcom,msm8996-cnoc"; + reg = <0x00500000 0x1000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + snoc: interconnect@524000 { + compatible = "qcom,msm8996-snoc"; + reg = <0x00524000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + a1noc: interconnect@562000 { + compatible = "qcom,msm8996-a1noc"; + reg = <0x00562000 0x5000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>; + }; + + a2noc: interconnect@583000 { + compatible = "qcom,msm8996-a2noc"; + reg = <0x00583000 0x7000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>; + }; + + mnoc: interconnect@5a4000 { + compatible = "qcom,msm8996-mnoc"; + reg = <0x005a4000 0x1c000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "iface"; + clocks = <&rpmcc RPM_SMD_MMAXI_CLK>, + <&rpmcc RPM_SMD_MMAXI_A_CLK>, + <&mmcc AHB_CLK_SRC>; + }; + + pnoc: interconnect@5c0000 { + compatible = "qcom,msm8996-pnoc"; + reg = <0x005c0000 0x3000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + tcsr_mutex_regs: syscon@740000 { compatible = "syscon"; reg = <0x00740000 0x40000>; @@ -1005,6 +1074,11 @@ mdp: mdp@901000 { assigned-clock-rates = <300000000>, <19200000>; + interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>, + <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1266,6 +1340,9 @@ gpu: gpu@b00000 { "mem", "mem_iface"; + interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>; + interconnect-names = "gfx-mem"; + power-domains = <&mmcc GPU_GX_GDSC>; iommus = <&adreno_smmu 0>; @@ -2289,6 +2366,9 @@ venus: video-codec@c00000 { <&mmcc VIDEO_AXI_CLK>, <&mmcc VIDEO_MAXI_CLK>; clock-names = "core", "iface", "bus", "mbus"; + interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>; + interconnect-names = "video-mem", "cpu-cfg"; iommus = <&venus_smmu 0x00>, <&venus_smmu 0x01>, <&venus_smmu 0x0a>, @@ -3004,6 +3084,10 @@ usb3: usb@6af8800 { <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <120000000>; + interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>; + interconnect-names = "usb-ddr", "apps-usb"; + power-domains = <&gcc USB30_GDSC>; status = "disabled"; -- 2.32.0