Re: [PATCH 14/39] arm64: dts: qcom: sdm630: Add TSENS node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/29/21 6:52 AM, Konrad Dybcio wrote:

On 29.07.2021 12:50, Thara Gopinath wrote:
Hi Konrad,

On 7/28/21 6:25 PM, Konrad Dybcio wrote:
This will enable temperature reporting for various SoC
components.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
   .../devicetree/bindings/thermal/qcom-tsens.yaml       |  1 +
   arch/arm64/boot/dts/qcom/sdm630.dtsi                  | 11 +++++++++++
   2 files changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 4a2eaf28e3fd..d3b9e9b600a2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -48,6 +48,7 @@ properties:
                 - qcom,sc7180-tsens
                 - qcom,sc7280-tsens
                 - qcom,sc8180x-tsens
+              - qcom,sdm630-tsens
                 - qcom,sdm845-tsens
                 - qcom,sm8150-tsens
                 - qcom,sm8250-tsens
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 1e54828817d5..7e9c80e35fba 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -627,6 +627,17 @@ mnoc: interconnect@1745000 {
                    <&mmcc AHB_CLK_SRC>;
           };
   +        tsens: thermal-sensor@10ae000 {
+            compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
+            reg = <0x010ae000 0x1000>, /* TM */
+                  <0x010ad000 0x1000>; /* SROT */
+            #qcom,sensors = <12>;

Are all 12 sensors used ? I see that in a later patch "arm64: dts: qcom: sdm630: Add thermal-zones configuration" only 9 are used.

Hi,

if I recall correctly, they all give output but not all of the mappings were documented in the downstream sources and we have no documentation whatsoever :(

Right. In that case, why not change #qcom,sensors to 9 and add rest of the sensors if and when needed ?



Konrad


--
Warm Regards
Thara (She/Her/Hers)



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux