Introduce max_timeout_count variable in the sdhci_host structure
and use in timeout calculation. By default its set to 0xE
(max timeout register value as per SDHC spec). But at the same time
vendors drivers can update it if they support different max timeout
register value than 0xE.
Signed-off-by: Sarthak Garg <sartgarg@xxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 15 +++++++++------
drivers/mmc/host/sdhci.h | 1 +
2 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index aba6e10..2debda3 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -939,16 +939,16 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
* timeout value.
*/
if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
- return 0xE;
+ return host->max_timeout_count;
/* Unspecified command, asume max */
if (cmd == NULL)
- return 0xE;
+ return host->max_timeout_count;
data = cmd->data;
/* Unspecified timeout, assume max */
if (!data && !cmd->busy_timeout)
- return 0xE;
+ return host->max_timeout_count;
/* timeout in us */
target_timeout = sdhci_target_timeout(host, cmd, data);
@@ -968,15 +968,15 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
while (current_timeout < target_timeout) {
count++;
current_timeout <<= 1;
- if (count >= 0xF)
+ if (count > host->max_timeout_count)
break;
}
- if (count >= 0xF) {
+ if (count > host->max_timeout_count) {
if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT))
DBG("Too large timeout 0x%x requested for CMD%d!\n",
count, cmd->opcode);
- count = 0xE;
+ count = host->max_timeout_count;
} else {
*too_big = false;
}
@@ -3940,6 +3940,9 @@ struct sdhci_host *sdhci_alloc_host(struct device *dev,
*/
host->adma_table_cnt = SDHCI_MAX_SEGS * 2 + 1;
+ if (!host->max_timeout_count)
+ host->max_timeout_count = 0xE;
+
return host;
}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 074dc18..e8d04e4 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -517,6 +517,7 @@ struct sdhci_host {
unsigned int max_clk; /* Max possible freq (MHz) */
unsigned int timeout_clk; /* Timeout freq (KHz) */
+ u8 max_timeout_count; /* Vendor specific max timeout count */
unsigned int clk_mul; /* Clock Muliplier value */
unsigned int clock; /* Current clock (MHz) */
--
2.7.4
