[PATCH v2 0/2] Fix serial number usage in MHI bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In some cases, device may boot straight to the mission mode. The serial number
and OEM PK hash values would remain unpopulated in those cases. Hence, move the
reads for those to the power up preparation phase such that controllers always
have them populated. Also, in order to maintain consistency with the way OEM PK
hash is displayed and improve the current way, depict serial number in
hexadecimals.

Tested on: X86_64 architecture with SDX65 on Ubuntu 18.04 distribution.

v2:
-Fixed nitpick for 0x%x
-Minor update to commit message for "Depict serial number" patch
-Added reviewed-by tags

Bhaumik Bhatt (2):
  bus: mhi: core: Move serial number read to power up phase
  bus: mhi: core: Depict serial number in hexadecimals

 drivers/bus/mhi/core/boot.c | 17 +----------------
 drivers/bus/mhi/core/init.c | 19 +++++++++++++++++--
 2 files changed, 18 insertions(+), 18 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux