Re: [Patch v4 6/6] dt-bindings: thermal: Add dt binding for QCOM LMh

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 27 Jul 2021 11:25:12 -0400, Thara Gopinath wrote:
> Add dt binding documentation to describe Qualcomm
> Limits Management Hardware node.
> 
> Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
> ---
> 
> v3->v4:
> 	- Changed dt property qcom,lmh-cpu-id to qcom,lmh-cpu and made it
> 	  a phandle pointing to the cpu node instead of a number as per
> 	  Rob Herring's review comments.
> 	- Added suffix -millicelsius to all temperature properties as per
> 	  Rob Herring's review comments.
> 	- Dropped unnecessary #includes in the example as pointed out by Bjorn.
> 	- Other minor fixes.
> 
>  .../devicetree/bindings/thermal/qcom-lmh.yaml | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml: required:3: None is not of type 'string'
	from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml: ignoring, error in schema: required: 3
warning: no schema found in file: ./Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
Documentation/devicetree/bindings/thermal/qcom-lmh.example.dt.yaml:0:0: /example-0/lmh@17d70800: failed to match any schema with compatible: ['qcom,sdm845-lmh']
Documentation/devicetree/bindings/thermal/qcom-lmh.example.dt.yaml:0:0: /example-1/lmh@17d78800: failed to match any schema with compatible: ['qcom,sdm845-lmh']
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1510556

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux