Re: [PATCH v10 0/6] Re-introduce TX FIFO resize for larger EP bursting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Op 23-07-2021 om 13:23 schreef Felipe Balbi:
Ferry Toth <fntoth@xxxxxxxxx> writes:

Hi

Op 23-07-2021 om 08:59 schreef Felipe Balbi:
Hi,

Ferry Toth <fntoth@xxxxxxxxx> writes:
kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
kernel: dwc3 dwc3.0.auto: request 00000000fbc71244 was not queued to ep5in
kernel: dwc3 dwc3.0.auto: request 00000000ad1b8c18 was not queued to ep5in
kernel: dwc3 dwc3.0.auto: Fifosize(2154) > RAM size(2022) ep5in
depth:115540359
kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
kernel: configfs-gadget gadget: u_audio_start_playback:451 Error!
kernel: dwc3 dwc3.0.auto: request 000000003c32dcc5 was not queued to ep5in
kernel: dwc3 dwc3.0.auto: request 00000000b2512aa9 was not queued to ep5in

Removing uac2 from the config makes the call trace go away, but the R/W
speed does not change.
I am testing with 5.14.0-rc2 and now related error appears (not in rc1).
Disabling uac2 solves it still. Any idea what it could be?

BUG: unable to handle page fault for address: 0000000500000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 0 P4D 0
Oops: 0010 [#1] SMP PTI
CPU: 0 PID: 494 Comm: irq/14-dwc3 Not tainted
5.14.0-rc2-edison-acpi-standard #1
(cool that you're running on ACPI heh)
Thanks to Andy this is Edison-Arduino board with ACPI.
Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542
2015.01.21:18.19.48
RIP: 0010:0x500000000
Code: Unable to access opcode bytes at RIP 0x4ffffffd6.
RSP: 0018:ffffa4d00045fc28 EFLAGS: 00010046
RAX: 0000000500000000 RBX: ffff8cd546aed200 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8cd547bfcae0 RDI: ffff8cd546aed200
RBP: ffff8cd547bfcae0 R08: 0000000000000000 R09: 0000000000000001
R10: ffff8cd541fd28c0 R11: 0000000000000000 R12: ffff8cd547342828
R13: ffff8cd546aed248 R14: 0000000000000000 R15: ffff8cd548b1d000
FS:  0000000000000000(0000) GS:ffff8cd57e200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000500000000 CR3: 000000000311e000 CR4: 00000000001006f0
Call Trace:
    ? dwc3_remove_requests.constprop.0+0x14d/0x170
    ? __dwc3_gadget_ep_disable+0x7a/0x160
    ? dwc3_gadget_ep_disable+0x3d/0xd0
    ? usb_ep_disable+0x1c/0x
    ? u_audio_stop_capture+0x79/0x120 [u_audio]
    ? afunc_set_alt+0x73/0x80 [usb_f_uac2]
    ? composite_setup+0x224/0x1b90 [libcomposite]
    ? __dwc3_gadget_kick_transfer+0x160/0x400
    ? dwc3_gadget_ep_queue+0xf3/0x1a0
    ? configfs_composite_setup+0x6b/0x90 [libcomposite]
    ? configfs_composite_setup+0x6b/0x90 [libcomposite]
    ? dwc3_ep0_interrupt+0x459/0xa40
    ? dwc3_thread_interrupt+0x8ee/0xf40
    ? __schedule+0x235/0x6c0
    ? disable_irq_nosync+0x10/0x10
    ? irq_thread_fn+0x1b/0x60
    ? irq_thread+0xc0/0x160
    ? irq_thread_check_affinity+0x70/0x70
    ? irq_forced_thread_fn+0x70/0x70
    ? kthread+0x122/0x140
    ? set_kthread_struct+0x40/0x40
    ? ret_from_fork+0x22/0x30
Do you mind enabling dwc3 traces and collecting them? Trying to figure
out how we got here.

I'll try if I can get the same error by booting with USB in host mode
and then switch to device mode. If so I can enable traces and collect as
you explained me before.

I'll try before monday, as then I fly for a holiday and will not be
available before rc5.
you can enable all of those with kernel cmdline :-)

https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html

you need ftrace_dump_on_oops=1 and also need the correct options on
trace_buf_size and trace_event.

On Edison-Arduino I have a switch to go to device mode, after which udev triggers a script configure gadgets through configfs.

I tried to log following these instructions:

https://www.kernel.org/doc/html/latest/driver-api/usb/dwc3.html#reporting-bugs  <https://www.kernel.org/doc/html/latest/driver-api/usb/dwc3.html#reporting-bugs>

Unfortunately the kernel crashes so badly I can not get to the ` cp /t/trace /root/trace.txt` line (after a while the watchdog kicks).

What to do next?


BTW there is a secondary problem not related to dwc3: the console is not working well and loosing chars. I can connect through wifi/ssh though.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux