Re: [PATCH v2 10/10] arm64: dts: qcom: sc7280: Update Q6V5 MSS node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-07-21 11:17, Stephen Boyd wrote:
Quoting Sibi Sankar (2021-07-20 03:13:00)
Update MSS node to support MSA based modem boot on SC7280 SoCs.

Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts |  7 +++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi    | 19 ++++++++++++++++---
 2 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 191e8a92d153..d66e3ca42ad5 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -343,3 +343,10 @@
                bias-pull-up;
        };
 };
+
+&remoteproc_mpss {
+       status = "okay";
+       compatible = "qcom,sc7280-mss-pil";
+       iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+       memory-region = <&mba_mem &mpss_mem>;
+};

Can this go above the pinctrl zone in this file? Preferably sorted
alphabetically by phandle.

Sure, looks like I just added
it based on sort order. Didn't
notice that it fell below the
pinctrl zone.


diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 56ea172f641f..6d3687744440 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -586,7 +586,8 @@

                remoteproc_mpss: remoteproc@4080000 {
                        compatible = "qcom,sc7280-mpss-pas";
-                       reg = <0 0x04080000 0 0x10000>;
+ reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+                       reg-names = "qdsp6", "rmb";

interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -597,8 +598,11 @@
interrupt-names = "wdog", "fatal", "ready", "handover",
                                          "stop-ack", "shutdown-ack";

-                       clocks = <&rpmhcc RPMH_CXO_CLK>;
-                       clock-names = "xo";
+                       clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                                <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+                                <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                                <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "offline", "snoc_axi", "xo";

                        power-domains = <&rpmhpd SC7280_CX>,
                                        <&rpmhpd SC7280_MSS>;
@@ -611,6 +615,15 @@
                        qcom,smem-states = <&modem_smp2p_out 0>;
                        qcom,smem-state-names = "stop";

+                       resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                                <&pdc_reset PDC_MODEM_SYNC_RESET>;
+                       reset-names = "mss_restart", "pdc_reset";
+
+ qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+                       qcom,ext-regs = <&tcsr_regs 0x10000 0x10004
+                                        &tcsr_mutex 0x26004 0x26008>;
+ qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
+
                        status = "disabled";

                        glink-edge {

Any reason to not combine this stuff with the previous patch?

I split it into two separate
patches just to show that sc7280
supports two ways of bringing
modem out of reset and method
used is determined by the platform.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux