Don't specify the reset GPIO for the OnePlus 6T, the panel in the 6T
will refuse to initialise if it has been reset so use this as a
workaround.
Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 +---
arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts | 2 ++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index e81f5cc9f26d..1339bac8afc2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -331,8 +331,6 @@ display_panel: panel@0 {
vddio-supply = <&vreg_l14a_1p88>;
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
pinctrl-names = "default";
pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
@@ -615,7 +613,7 @@ mux {
pins = "gpio6", "gpio25", "gpio26";
function = "gpio";
drive-strength = <8>;
- bias-disable = <0>;
+ bias-disable;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
index 72842c887617..5c728c1555f3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
@@ -16,4 +16,6 @@ &display_panel {
status = "okay";
compatible = "samsung,sofef00";
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
};
--
2.32.0
