Re: [PATCH v4 2/2] arm64: dts: sc7180: Add required-opps for i2c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri 16 Jul 15:21 CDT 2021, Stephen Boyd wrote:

> Quoting Bjorn Andersson (2021-07-16 13:18:56)
> > On Fri 16 Jul 05:00 CDT 2021, Rajendra Nayak wrote:
> >
> > > qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 MHz)
> > > Though qup-i2c does not support DVFS, it still needs to vote for a
> > > performance state on 'CX' to satisfy the 19.2 Mhz clock frequency
> > > requirement.
> > >
> >
> > Sounds good, but...
> >
> > > Use 'required-opps' to pass this information from
> > > device tree, and also add the power-domains property to specify
> > > the CX power-domain.
> > >
> >
> > ..is the required-opps really needed with my rpmhpd patch in place?
> >
> 
> Yes? Because rpmhpd_opp_low_svs is not the lowest performance state for
> CX.

On e.g. sm8250 the first available non-zero corner presented in cmd-db
is low_svs.

And if this (which?) clock requires a higher corner than the lowest
possible in order to tick at this "lowest" frequency, I'm certainly
interested in some more details.

Regards,
Bjorn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux