Re: [PATCH 3/3] power: reset: qcom-pon: Add support for 'qcom,pon-reboot-not-used'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun 04 Jul 21:50 CDT 2021, Shawn Guo wrote:

> Check property 'qcom,pon-reboot-not-used' and skip reboot-mode setup
> if the property is present.  This is useful for devices that use IMEM
> instead of PON register to pass reboot mode, but still want to populate
> pwrkey and resin devices.
> 

If IMEM is used instead, I think it should be sufficient for the DT
author to omit mode-* properties to achieve this. If the PON hardware
doesn't support mode-*, then that should be reflected in the DT binding
and compatible.

Regards,
Bjorn

> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> ---
>  drivers/power/reset/qcom-pon.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c
> index 4a688741a88a..85fae9e85878 100644
> --- a/drivers/power/reset/qcom-pon.c
> +++ b/drivers/power/reset/qcom-pon.c
> @@ -47,6 +47,14 @@ static int pm8916_pon_probe(struct platform_device *pdev)
>  	struct pm8916_pon *pon;
>  	int error;
>  
> +	if (device_property_present(&pdev->dev, "qcom,pon-reboot-not-used")) {
> +		/*
> +		 * Skip reboot-mode setup and registration if PON is not used
> +		 * for passing reboot mode at all.
> +		 */
> +		goto done;
> +	}
> +
>  	pon = devm_kzalloc(&pdev->dev, sizeof(*pon), GFP_KERNEL);
>  	if (!pon)
>  		return -ENOMEM;
> @@ -75,6 +83,7 @@ static int pm8916_pon_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, pon);
>  
> +done:
>  	return devm_of_platform_populate(&pdev->dev);
>  }
>  
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux