[PATCH v14 5/6] usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In order to take advantage of the TX fifo resizing logic, manually add
these properties to the DWC3 child node by default.  This will allow
the DWC3 gadget to resize the TX fifos for the IN endpoints, which
help with performance.

Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 49e6ca9..2223b59 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -645,6 +645,7 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
 	struct device_node	*np = pdev->dev.of_node, *dwc3_np;
 	struct device		*dev = &pdev->dev;
+	struct property		*prop;
 	int			ret;
 
 	dwc3_np = of_get_compatible_child(np, "snps,dwc3");
@@ -653,6 +654,20 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	prop = devm_kzalloc(dev, sizeof(*prop), GFP_KERNEL);
+	if (!prop) {
+		ret = -ENOMEM;
+		dev_err(dev, "unable to allocate memory for property\n");
+		goto node_put;
+	}
+
+	prop->name = "tx-fifo-resize";
+	ret = of_add_property(dwc3_np, prop);
+	if (ret) {
+		dev_err(dev, "unable to add property\n");
+		goto node_put;
+	}
+
 	ret = of_platform_populate(np, NULL, NULL, dev);
 	if (ret) {
 		dev_err(dev, "failed to register dwc3 core - %d\n", ret);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux