Re: [PATCH v2 2/4] clk: qcom: a53pll/mux: Use unique clock name

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jul 10, 2021 at 12:17:33AM -0500, Bjorn Andersson wrote:
> On Sat 03 Jul 21:40 CDT 2021, Shawn Guo wrote:
> 
> > Different from MSM8916 which has only one a53pll/mux clock, MSM8939 gets
> > three for Cluster0 (little cores), Cluster1 (big cores) and CCI (Cache
> > Coherent Interconnect).  That said, a53pll/mux clock needs to be named
> > uniquely.  Append @unit-address of device node to the clock name, so
> > that a53pll/mux will be named like below on MSM8939.
> > 
> >   a53pll@b016000
> >   a53pll@b116000
> >   a53pll@b1d0000
> > 
> >   a53mux@b1d1000
> >   a53mux@b011000
> >   a53mux@b111000
> > 
> > Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> > ---
> >  drivers/clk/qcom/a53-pll.c      | 8 +++++++-
> >  drivers/clk/qcom/apcs-msm8916.c | 8 +++++++-
> >  2 files changed, 14 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c
> > index d6756bd777ce..96a118be912d 100644
> > --- a/drivers/clk/qcom/a53-pll.c
> > +++ b/drivers/clk/qcom/a53-pll.c
> > @@ -37,6 +37,7 @@ static const struct regmap_config a53pll_regmap_config = {
> >  static int qcom_a53pll_probe(struct platform_device *pdev)
> >  {
> >  	struct device *dev = &pdev->dev;
> > +	struct device_node *np = dev->of_node;
> >  	struct regmap *regmap;
> >  	struct resource *res;
> >  	struct clk_pll *pll;
> > @@ -66,7 +67,12 @@ static int qcom_a53pll_probe(struct platform_device *pdev)
> >  	pll->status_bit = 16;
> >  	pll->freq_tbl = a53pll_freq;
> >  
> > -	init.name = "a53pll";
> > +	/* Use an unique name by appending @unit-address */
> > +	init.name = devm_kasprintf(dev, GFP_KERNEL, "a53pll%s",
> > +				   strchrnul(np->full_name, '@'));
> 
> While the result is nice, this isn't...
> 
> Is your dev_name() reasonable? What about "%s:a53pll", dev_name(dev) ?

dev_name() is somehow reasonable for a53pll.

  b016000.clock-controller:a53pll
  b116000.clock-controller:a53pll
  b1d0000.clock-controller:a53pll

But I prefer to the existing names, because I would like to use the same
naming schema for both a53pll and a53mux.  If using dev_name() on a53mux,
we will get the following which is less reasonable.

  qcom-apcs-msm8916-clk.1.auto:a53mux
  qcom-apcs-msm8916-clk.2.auto:a53mux
  qcom-apcs-msm8916-clk.3.auto:a53mux

Shawn




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux