Re: [v8 0/6] drm: Support basic DPCD backlight in panel-simple and add a new panel ATNA33XC20

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 09, 2021 at 06:54:05AM -0700, Doug Anderson wrote:
> Hi,
> 
> On Sat, Jun 26, 2021 at 9:52 AM Rajeev Nandan <rajeevny@xxxxxxxxxxxxxx> wrote:
> >
> > This series adds the support for the eDP panel that needs the backlight
> > controlling over the DP AUX channel using DPCD registers of the panel
> > as per the VESA's standard.
> >
> > This series also adds support for the Samsung eDP AMOLED panel that
> > needs DP AUX to control the backlight, and introduces new delays in the
> > @panel_desc.delay to support this panel.
> >
> > This patch series depends on the following two series:
> > - Doug's series [1], exposed the DP AUX channel to the panel-simple.
> > - Lyude's series [2], introduced new drm helper functions for DPCD
> >   backlight.
> >
> > This series is the logical successor to the series [3].
> >
> > Changes in v1:
> > - Created dpcd backlight helper with very basic functionality, added
> >   backlight registration in the ti-sn65dsi86 bridge driver.
> >
> > Changes in v2:
> > - Created a new DisplayPort aux backlight driver and moved the code from
> >   drm_dp_aux_backlight.c (v1) to the new driver.
> >
> > Changes in v3:
> > - Fixed module compilation (kernel test bot).
> >
> > Changes in v4:
> > - Added basic DPCD backlight support in panel-simple.
> > - Added support for a new Samsung panel ATNA33XC20 that needs DPCD
> >   backlight controlling and has a requirement of delays between enable
> >   GPIO and regulator.
> >
> > Changes in v5:
> > Addressed review suggestions from Douglas:
> > - Created a new API drm_panel_dp_aux_backlight() in drm_panel.c
> > - Moved DP AUX backlight functions from panel-simple.c to drm_panel.c
> > - panel-simple probe() calls drm_panel_dp_aux_backlight() to create
> >   backlight when the backlight phandle is not specified in panel DT
> >   and DP AUX channel is present.
> > - Added check for drm_edp_backlight_supported() before registering.
> > - Removed the @uses_dpcd_backlight flag from panel_desc as this
> >   should be auto-detected.
> > - Updated comments/descriptions.
> >
> > Changes in v6:
> > - Rebased
> > - Updated wanrning messages, fixed word wrapping in comments.
> > - Fixed ordering of memory allocation
> >
> > Changes in v7:
> > - Updated the disable_to_power_off and power_to_enable panel delays
> > as discovered at <https://crrev.com/c/2966167> (Douglas)
> >
> > Changes in v8:
> > - Now using backlight_is_blank() to get the backlight blank status (Sam Ravnborg)
> > - Added a new patch #4 to fix the warnings for eDP panel description (Sam Ravnborg)
> >
> > [1] https://lore.kernel.org/dri-devel/20210525000159.3384921-1-dianders@xxxxxxxxxxxx/
> > [2] https://lore.kernel.org/dri-devel/20210514181504.565252-1-lyude@xxxxxxxxxx/
> > [3] https://lore.kernel.org/dri-devel/1619416756-3533-1-git-send-email-rajeevny@xxxxxxxxxxxxxx/
> >
> > Rajeev Nandan (6):
> >   drm/panel: add basic DP AUX backlight support
> >   drm/panel-simple: Support DP AUX backlight
> >   drm/panel-simple: Support for delays between GPIO & regulator
> >   drm/panel-simple: Update validation warnings for eDP panel description
> >   dt-bindings: display: simple: Add Samsung ATNA33XC20
> >   drm/panel-simple: Add Samsung ATNA33XC20
> >
> >  .../bindings/display/panel/panel-simple.yaml       |   2 +
> >  drivers/gpu/drm/drm_panel.c                        | 108 +++++++++++++++++++++
> >  drivers/gpu/drm/panel/panel-simple.c               |  73 +++++++++++++-
> >  include/drm/drm_panel.h                            |  15 ++-
> >  4 files changed, 190 insertions(+), 8 deletions(-)
> 
> Pushed to drm-misc-next.
> 
> 4bfe6c8f7c23 drm/panel-simple: Add Samsung ATNA33XC20
> c20dec193584 dt-bindings: display: simple: Add Samsung ATNA33XC20
> 13aceea56fd5 drm/panel-simple: Update validation warnings for eDP
> panel description
> 18a1488bf1e1 drm/panel-simple: Support for delays between GPIO & regulator
> bfd451403d70 drm/panel-simple: Support DP AUX backlight
> 10f7b40e4f30 drm/panel: add basic DP AUX backlight support

depmod: ERROR: Cycle detected: drm_kms_helper -> drm -> drm_kms_helper

Looks to be due to drm_edp_backlight_enable().

-- 
Ville Syrjälä
Intel



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux