On Fri 09 Jul 12:32 CDT 2021, Dmitry Baryshkov wrote:
> Switch dispcc and videocc into using MMCX domain directly. Drop the now
> unused mmcx regulator.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 11 ++---------
> 1 file changed, 2 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 4c0de12aaba6..2a468b85dc09 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -271,13 +271,6 @@ memory@80000000 {
> reg = <0x0 0x80000000 0x0 0x0>;
> };
>
> - mmcx_reg: mmcx-reg {
> - compatible = "regulator-fixed-domain";
> - power-domains = <&rpmhpd SM8250_MMCX>;
> - required-opps = <&rpmhpd_opp_low_svs>;
> - regulator-name = "MMCX";
> - };
> -
> pmu {
> compatible = "arm,armv8-pmuv3";
> interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
> @@ -2362,7 +2355,7 @@ videocc: clock-controller@abf0000 {
> clocks = <&gcc GCC_VIDEO_AHB_CLK>,
> <&rpmhcc RPMH_CXO_CLK>,
> <&rpmhcc RPMH_CXO_CLK_A>;
> - mmcx-supply = <&mmcx_reg>;
> + power-domains = <&rpmhpd SM8250_MMCX>;
> clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
> #clock-cells = <1>;
> #reset-cells = <1>;
> @@ -2627,7 +2620,7 @@ opp-358000000 {
> dispcc: clock-controller@af00000 {
> compatible = "qcom,sm8250-dispcc";
> reg = <0 0x0af00000 0 0x10000>;
> - mmcx-supply = <&mmcx_reg>;
> + power-domains = <&rpmhpd SM8250_MMCX>;
> clocks = <&rpmhcc RPMH_CXO_CLK>,
> <&dsi0_phy 0>,
> <&dsi0_phy 1>,
> --
> 2.30.2
>
