Re: [V4 3/3] arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Odelu Kukatla (2021-06-18 04:28:54)
> Add Epoch Subsystem (EPSS) L3 interconnect provider node on SC7280
> SoCs.
>
> Signed-off-by: Odelu Kukatla <okukatla@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 38a7f55..7690d7e 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -1153,6 +1153,15 @@
>                         };
>                 };
>
> +               epss_l3: interconnect@18590000 {
> +                       compatible = "qcom,sc7280-epss-l3";
> +                       reg = <0 0x18590000 0 1000>, <0 0x18591000 0 0x100>,
> +                               <0 0x18592000 0 0x100>, <0 0x18593000 0 0x100>;
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> +                       clock-names = "xo", "alternate";
> +                       #interconnect-cells = <1>;
> +               };

Is this inside the soc node? Because it should be but then the next node
is called 'interconnect' and has no address so that is probably outside
the soc node. Please put nodes with a reg property like this into the
soc node.

> +
>                 clk_virt: interconnect {
>                         compatible = "qcom,sc7280-clk-virt";
>                         #interconnect-cells = <2>;



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux