On 2021-06-22 21:30, Prasad Malisetty wrote:
pipe-clk mux needs to switch between pipe_clk
and XO as part of LPM squence. This is done by setting
pipe_clk mux as parent of pipe_clk after phy init.
This is a new requirement for sc7280.
For accessing to DBI registers during L23,
need to switch the pipe clock with free-running
clock (TCXO) using GCC’s registers
Signed-off-by: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-qcom.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
b/drivers/pci/controller/dwc/pcie-qcom.c
index 8a7a300..80e9ee4 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -166,6 +166,9 @@ struct qcom_pcie_resources_2_7_0 {
struct regulator_bulk_data supplies[2];
struct reset_control *pci_reset;
struct clk *pipe_clk;
+ struct clk *pipe_clk_mux;
+ struct clk *pipe_ext_src;
+ struct clk *ref_clk_src;
};
union qcom_pcie_resources {
@@ -1167,6 +1170,20 @@ static int qcom_pcie_get_resources_2_7_0(struct
qcom_pcie *pcie)
if (ret < 0)
return ret;
+ if (of_device_is_compatible(dev->of_node, "qcom,pcie-sc7280")) {
+ res->pipe_clk_mux = devm_clk_get(dev, "pipe_mux");
+ if (IS_ERR(res->pipe_clk_mux))
+ return PTR_ERR(res->pipe_clk_mux);
+
+ res->pipe_ext_src = devm_clk_get(dev, "phy_pipe");
+ if (IS_ERR(res->pipe_ext_src))
+ return PTR_ERR(res->pipe_ext_src);
+
+ res->ref_clk_src = devm_clk_get(dev, "ref");
+ if (IS_ERR(res->ref_clk_src))
+ return PTR_ERR(res->ref_clk_src);
+ }
+
res->pipe_clk = devm_clk_get(dev, "pipe");
return PTR_ERR_OR_ZERO(res->pipe_clk);
}
@@ -1255,6 +1272,11 @@ static void qcom_pcie_deinit_2_7_0(struct
qcom_pcie *pcie)
static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
{
struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
+ struct dw_pcie *pci = pcie->pci;
+ struct device *dev = pci->dev;
+
+ if (of_device_is_compatible(dev->of_node, "qcom,pcie-sc7280"))
+ clk_set_parent(res->pipe_clk_mux, res->pipe_ext_src);
return clk_prepare_enable(res->pipe_clk);
}
Hi All,
Greetings of the day !!
Could you please provide your comments on updated change series
Thanks
-Prasad
