[PATCH] bus: mhi: core: Use mhi_soc_reset() API instead of register write

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, register writes are used when ramdump collection in
panic path occurs. Replace that with new mhi_soc_reset() API such
that a controller defined reset() function is exercised if one is
present and the regular SOC reset is done if it is not.

Signed-off-by: Bhaumik Bhatt <bbhatt@xxxxxxxxxxxxxx>
---
 drivers/bus/mhi/core/boot.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index 8100cf5..10a91df 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -112,9 +112,7 @@ static int __mhi_download_rddm_in_panic(struct mhi_controller *mhi_cntrl)
 			/* Hardware reset so force device to enter RDDM */
 			dev_dbg(dev,
 				"Did not enter RDDM, do a host req reset\n");
-			mhi_write_reg(mhi_cntrl, mhi_cntrl->regs,
-				      MHI_SOC_RESET_REQ_OFFSET,
-				      MHI_SOC_RESET_REQ);
+			mhi_soc_reset(mhi_cntrl);
 			udelay(delayus);
 		}
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux