[PATCH v2 4/7] media: venus: hfi: Skip AON register programming for V6 1pipe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



AON register programming is used to set NOC to low
power mode during V6 power off sequence. However
AON register memory map is not applicable to 1pipe,
hence skipping AON register programming.

Co-developed-by: Mansur Alisha Shaik <mansur@xxxxxxxxxxxxxx>
Co-developed-by: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
Signed-off-by: Dikshita Agarwal <dikshita@xxxxxxxxxxxxxx>
Acked-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
---
 drivers/media/platform/qcom/venus/hfi_venus.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/qcom/venus/hfi_venus.c b/drivers/media/platform/qcom/venus/hfi_venus.c
index ce98c52..3a75a27 100644
--- a/drivers/media/platform/qcom/venus/hfi_venus.c
+++ b/drivers/media/platform/qcom/venus/hfi_venus.c
@@ -551,6 +551,9 @@ static int venus_halt_axi(struct venus_hfi_device *hdev)
 	if (IS_V6(hdev->core)) {
 		writel(0x3, cpu_cs_base + CPU_CS_X2RPMH_V6);
 
+		if (hdev->core->res->num_vpp_pipes == 1)
+			goto skip_aon_mvp_noc;
+
 		writel(0x1, aon_base + AON_WRAPPER_MVP_NOC_LPI_CONTROL);
 		ret = readl_poll_timeout(aon_base + AON_WRAPPER_MVP_NOC_LPI_STATUS,
 					 val,
@@ -560,6 +563,7 @@ static int venus_halt_axi(struct venus_hfi_device *hdev)
 		if (ret)
 			return -ETIMEDOUT;
 
+skip_aon_mvp_noc:
 		mask_val = (BIT(2) | BIT(1) | BIT(0));
 		writel(mask_val, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);
 
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux