In "qmp_cooling_devices_register", the count value is initially QMP_NUM_COOLING_RESOURCES, which is 2. Based on the initial count value, the memory for cooling_devs is allocated. Then while calling the "qmp_cooling_device_add" function, count value is post-incremented for each child node. This makes the out of bound access to the cooling_dev array. Fix it by passing the QMP_NUM_COOLING_RESOURCES definition to devm_kzalloc() and initializing the count to 0. While at it, let's also free the memory allocated to cooling_dev if no cooling device is found in DT and during unroll phase. Cc: stable@xxxxxxxxxxxxxxx # 5.4 Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- Changes in v2: * Used QMP_NUM_COOLING_RESOURCES directly and initialized count to 0 drivers/soc/qcom/qcom_aoss.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c index 934fcc4d2b05..7b6b94332510 100644 --- a/drivers/soc/qcom/qcom_aoss.c +++ b/drivers/soc/qcom/qcom_aoss.c @@ -476,12 +476,12 @@ static int qmp_cooling_device_add(struct qmp *qmp, static int qmp_cooling_devices_register(struct qmp *qmp) { struct device_node *np, *child; - int count = QMP_NUM_COOLING_RESOURCES; + int count = 0; int ret; np = qmp->dev->of_node; - qmp->cooling_devs = devm_kcalloc(qmp->dev, count, + qmp->cooling_devs = devm_kcalloc(qmp->dev, QMP_NUM_COOLING_RESOURCES, sizeof(*qmp->cooling_devs), GFP_KERNEL); @@ -497,12 +497,16 @@ static int qmp_cooling_devices_register(struct qmp *qmp) goto unroll; } + if (!count) + devm_kfree(qmp->dev, qmp->cooling_devs); + return 0; unroll: while (--count >= 0) thermal_cooling_device_unregister (qmp->cooling_devs[count].cdev); + devm_kfree(qmp->dev, qmp->cooling_devs); return ret; } -- 2.25.1