If wakeup capable devices are connected to the controller (directly or through hubs) at suspend time keep the power domain on in order to support wakeup from these devices. Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx> --- Checking phy_power_off flag instead of usb_wakeup_enabled_descendants to keep gdsc active. drivers/usb/dwc3/dwc3-qcom.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 82125bc..ba31aa3 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -17,6 +17,7 @@ #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> +#include <linux/pm_domain.h> #include <linux/usb/of.h> #include <linux/reset.h> #include <linux/iopoll.h> @@ -355,9 +356,15 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) u32 val; int i, ret; + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain); + if (qcom->is_suspended) return 0; + if (!dwc->phy_power_off && dwc->xhci) + genpd->flags |= GENPD_FLAG_ACTIVE_WAKEUP; + val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG); if (!(val & PWR_EVNT_LPM_IN_L2_MASK)) dev_err(qcom->dev, "HS-PHY not in L2\n"); @@ -382,9 +389,15 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom) int ret; int i; + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain); + if (!qcom->is_suspended) return 0; + if (dwc->xhci) + genpd->flags &= ~GENPD_FLAG_ACTIVE_WAKEUP; + if (device_may_wakeup(qcom->dev)) dwc3_qcom_disable_interrupts(qcom); -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
