[PATCH v2 0/3] Add USB HS support for SM4250/6115

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The USB controller found on SM4250/6115 is dwc3 (phy v1), very similar to
existing supported phys (like msm8996), with slighly different tune seq.

PS1: I know the series is already in usb-next, I can make a new series that
will remove the 4250 compat from the existing code (but it would be 3 commits
as well), let me know how to proceed.

PS2: I kept the Bjorn Reviewed-by, because I'm only removing the compat string,
which he agreed to, in a similar setting https://lkml.org/lkml/2021/6/25/351

v1: https://lkml.org/lkml/2021/6/22/1183

Changes from v1:
- remove 4250 compat, both platforms will share one dtsi

Iskren Chernev (3):
  dt-bindings: usb: qcom,dwc3: Add bindings for sm6115
  dt-bindings: phy: qcom,qusb2: document sm6115 compatible
  phy: qcom-qusb2: Add configuration for SM6115

 .../bindings/phy/qcom,qusb2-phy.yaml          |  1 +
 .../devicetree/bindings/usb/qcom,dwc3.yaml    |  1 +
 drivers/phy/qualcomm/phy-qcom-qusb2.c         | 31 +++++++++++++++++++
 3 files changed, 33 insertions(+)


base-commit: e71e3a48a7e89fa71fb70bf4602367528864d2ff
-- 
2.32.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux