Re: [PATCH v4 1/2] dt-bindings: pinctrl: qcom: Add SM6115 pinctrl bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri 25 Jun 05:21 CDT 2021, Iskren Chernev wrote:

> Add device tree binding Documentation details for Qualcomm SM6115 and
> SM4250 pinctrl.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@xxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
>  .../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 182 ++++++++++++++++++
>  1 file changed, 182 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
> new file mode 100644
> index 000000000000..34d57a5c5f75
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
> @@ -0,0 +1,182 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
> +
> +maintainers:
> +  - Iskren Chernev <iskren.chernev@xxxxxxxxx>
> +
> +description:
> +  This binding describes the Top Level Mode Multiplexer block found in the
> +  SM6115 and SM4250 platforms.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sm4250-tlmm
> +      - qcom,sm6115-tlmm
> +
> +  reg:
> +    minItems: 3
> +    maxItems: 3
> +
> +  reg-names:
> +    items:
> +      - const: west
> +      - const: south
> +      - const: east
> +
> +  interrupts:
> +    description: Specifies the TLMM summary IRQ
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    description:
> +      Specifies the PIN numbers and Flags, as defined in defined in
> +      include/dt-bindings/interrupt-controller/irq.h
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    description: Specifying the pin number and flags, as defined in
> +      include/dt-bindings/gpio/gpio.h
> +    const: 2
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +  wakeup-parent:
> +    maxItems: 1
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> +  '-state$':
> +    oneOf:
> +      - $ref: "#/$defs/qcom-sm6115-tlmm-state"
> +      - patternProperties:
> +          ".*":
> +            $ref: "#/$defs/qcom-sm6115-tlmm-state"
> +
> +'$defs':
> +  qcom-sm6115-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-3])$"
> +            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
> +                      sdc2_clk, sdc2_cmd, sdc2_data ]
> +        minItems: 1
> +        maxItems: 36
> +
> +      function:
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +        enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
> +                cci_timer, cri_trng, dac_calib, dbg_out, ddr_bist, ddr_pxi0,
> +                ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
> +                gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, jitter_bist,
> +                mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, mpm_pwr, mss_lte,
> +                m_voc, nav_gpio, pa_indicator, pbs, pbs_out, phase_flag,
> +                pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti,
> +                qdss_gpio, qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb,
> +                sdc2_tb, sd_write, ssbi_wtr1, tgu, tsense_pwm, uim1_clk,
> +                uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
> +                uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger,
> +                wlan1_adc0, elan1_adc1 ]
> +
> +      drive-strength:
> +        enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +        default: 2
> +        description:
> +          Selects the drive strength for the specified pins, in mA.
> +
> +      bias-pull-down: true
> +
> +      bias-pull-up: true
> +
> +      bias-disable: true
> +
> +      output-high: true
> +
> +      output-low: true
> +
> +    required:
> +      - pins
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - gpio-controller
> +  - '#gpio-cells'
> +  - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        tlmm: pinctrl@500000 {
> +                compatible = "qcom,sm4250-tlmm";
> +                reg = <0x500000 0x400000>,
> +                        <0x900000 0x400000>,
> +                        <0xd00000 0x400000>;
> +                reg-names = "west", "south", "east";
> +                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +                interrupt-controller;
> +                #interrupt-cells = <2>;
> +                gpio-ranges = <&tlmm 0 0 114>;
> +
> +                sdc2_on_state: sdc2-on-state {
> +                        clk {
> +                                pins = "sdc2_clk";
> +                                bias-disable;
> +                                drive-strength = <16>;
> +                        };
> +
> +                        cmd {
> +                                pins = "sdc2_cmd";
> +                                bias-pull-up;
> +                                drive-strength = <10>;
> +                        };
> +
> +                        data {
> +                                pins = "sdc2_data";
> +                                bias-pull-up;
> +                                drive-strength = <10>;
> +                        };
> +
> +                        sd-cd {
> +                                pins = "gpio88";
> +                                function = "gpio";
> +                                bias-pull-up;
> +                                drive-strength = <2>;
> +                        };
> +                };
> +        };
> +
> -- 
> 2.32.0
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux