Add out of reset sequence support for modem sub-system on SC7280 SoCs.
It requires access to an additional set of qaccept registers, external
power/clk control registers and halt vq6 register to put the modem back
into reset.
Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
---
drivers/remoteproc/qcom_q6v5_mss.c | 245 ++++++++++++++++++++++++++++++++++++-
1 file changed, 241 insertions(+), 4 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 5d21084004cb..4e32811e0025 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -77,6 +77,14 @@
#define HALT_ACK_TIMEOUT_US 100000
+/* QACCEPT Register Offsets */
+#define QACCEPT_ACCEPT_REG 0x0
+#define QACCEPT_ACTIVE_REG 0x4
+#define QACCEPT_DENY_REG 0x8
+#define QACCEPT_REQ_REG 0xC
+
+#define QACCEPT_TIMEOUT_US 50
+
/* QDSP6SS_RESET */
#define Q6SS_STOP_CORE BIT(0)
#define Q6SS_CORE_ARES BIT(1)
@@ -143,6 +151,9 @@ struct rproc_hexagon_res {
bool has_alt_reset;
bool has_mba_logs;
bool has_spare_reg;
+ bool has_qaccept_regs;
+ bool has_ext_cntl_regs;
+ bool has_vq6;
};
struct q6v5 {
@@ -158,8 +169,18 @@ struct q6v5 {
u32 halt_q6;
u32 halt_modem;
u32 halt_nc;
+ u32 halt_vq6;
u32 conn_box;
+ u32 qaccept_mdm;
+ u32 qaccept_cx;
+ u32 qaccept_axi;
+
+ u32 axim1_clk_off;
+ u32 crypto_clk_off;
+ u32 force_clk_on;
+ u32 rscc_disable;
+
struct reset_control *mss_restart;
struct reset_control *pdc_reset;
@@ -201,6 +222,9 @@ struct q6v5 {
bool has_alt_reset;
bool has_mba_logs;
bool has_spare_reg;
+ bool has_qaccept_regs;
+ bool has_ext_cntl_regs;
+ bool has_vq6;
int mpss_perm;
int mba_perm;
const char *hexagon_mdt_image;
@@ -213,6 +237,7 @@ enum {
MSS_MSM8996,
MSS_MSM8998,
MSS_SC7180,
+ MSS_SC7280,
MSS_SDM845,
};
@@ -473,6 +498,12 @@ static int q6v5_reset_assert(struct q6v5 *qproc)
regmap_update_bits(qproc->conn_map, qproc->conn_box,
AXI_GATING_VALID_OVERRIDE, 0);
ret = reset_control_deassert(qproc->mss_restart);
+ } else if (qproc->has_ext_cntl_regs) {
+ regmap_write(qproc->conn_map, qproc->rscc_disable, 0);
+ reset_control_assert(qproc->pdc_reset);
+ reset_control_assert(qproc->mss_restart);
+ reset_control_deassert(qproc->pdc_reset);
+ ret = reset_control_deassert(qproc->mss_restart);
} else {
ret = reset_control_assert(qproc->mss_restart);
}
@@ -490,7 +521,7 @@ static int q6v5_reset_deassert(struct q6v5 *qproc)
ret = reset_control_reset(qproc->mss_restart);
writel(0, qproc->rmb_base + RMB_MBA_ALT_RESET);
reset_control_deassert(qproc->pdc_reset);
- } else if (qproc->has_spare_reg) {
+ } else if (qproc->has_spare_reg || qproc->has_ext_cntl_regs) {
ret = reset_control_reset(qproc->mss_restart);
} else {
ret = reset_control_deassert(qproc->mss_restart);
@@ -604,7 +635,7 @@ static int q6v5proc_reset(struct q6v5 *qproc)
}
goto pbl_wait;
- } else if (qproc->version == MSS_SC7180) {
+ } else if (qproc->version == MSS_SC7180 || qproc->version == MSS_SC7280) {
val = readl(qproc->reg_base + QDSP6SS_SLEEP);
val |= Q6SS_CBCR_CLKEN;
writel(val, qproc->reg_base + QDSP6SS_SLEEP);
@@ -787,6 +818,82 @@ static int q6v5proc_reset(struct q6v5 *qproc)
return ret;
}
+static int q6v5proc_enable_qchannel(struct q6v5 *qproc, struct regmap *map, u32 offset)
+{
+ unsigned int val;
+ int ret;
+
+ if (!qproc->has_qaccept_regs)
+ return 0;
+
+ if (qproc->has_ext_cntl_regs) {
+ regmap_write(qproc->conn_map, qproc->rscc_disable, 0);
+ regmap_write(qproc->conn_map, qproc->force_clk_on, 1);
+
+ ret = regmap_read_poll_timeout(qproc->halt_map, qproc->axim1_clk_off, val,
+ !val, 1, Q6SS_CBCR_TIMEOUT_US);
+ if (ret) {
+ dev_err(qproc->dev, "failed to enable axim1 clock\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ regmap_write(map, offset + QACCEPT_REQ_REG, 1);
+
+ /* Wait for accept */
+ ret = regmap_read_poll_timeout(map, offset + QACCEPT_ACCEPT_REG, val, val, 5,
+ QACCEPT_TIMEOUT_US);
+ if (ret) {
+ dev_err(qproc->dev, "qchannel enable failed\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void q6v5proc_disable_qchannel(struct q6v5 *qproc, struct regmap *map, u32 offset)
+{
+ int ret;
+ unsigned int val, retry;
+ unsigned int nretry = 10;
+ bool takedown_complete = false;
+
+ if (!qproc->has_qaccept_regs)
+ return;
+
+ while (!takedown_complete && nretry) {
+ nretry--;
+
+ regmap_read_poll_timeout(map, offset + QACCEPT_ACTIVE_REG, val, !val, 5,
+ QACCEPT_TIMEOUT_US);
+
+ regmap_write(map, offset + QACCEPT_REQ_REG, 0);
+
+ retry = 10;
+ while (retry) {
+ usleep_range(5, 10);
+ retry--;
+ ret = regmap_read(map, offset + QACCEPT_DENY_REG, &val);
+ if (!ret && val) {
+ regmap_write(map, offset + QACCEPT_REQ_REG, 1);
+ break;
+ }
+
+ ret = regmap_read(map, offset + QACCEPT_ACCEPT_REG, &val);
+ if (!ret && !val) {
+ takedown_complete = true;
+ break;
+ }
+ }
+
+ if (!retry)
+ break;
+ }
+
+ if (!takedown_complete)
+ dev_err(qproc->dev, "qchannel takedown failed\n");
+}
+
static void q6v5proc_halt_axi_port(struct q6v5 *qproc,
struct regmap *halt_map,
u32 offset)
@@ -950,6 +1057,12 @@ static int q6v5_mba_load(struct q6v5 *qproc)
goto assert_reset;
}
+ ret = q6v5proc_enable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi);
+ if (ret) {
+ dev_err(qproc->dev, "failed to enable axi bridge\n");
+ goto disable_active_clks;
+ }
+
/*
* Some versions of the MBA firmware will upon boot wipe the MPSS region as well, so provide
* the Q6 access to this region.
@@ -996,8 +1109,13 @@ static int q6v5_mba_load(struct q6v5 *qproc)
halt_axi_ports:
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
+ if (qproc->has_vq6)
+ q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_vq6);
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
+ q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_mdm);
+ q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_cx);
+ q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi);
mba_load_err = true;
reclaim_mba:
xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
@@ -1047,6 +1165,8 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
qproc->dp_size = 0;
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
+ if (qproc->has_vq6)
+ q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_vq6);
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
if (qproc->version == MSS_MSM8996) {
@@ -1059,6 +1179,24 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
}
+ if (qproc->has_ext_cntl_regs) {
+ regmap_write(qproc->conn_map, qproc->rscc_disable, 1);
+
+ ret = regmap_read_poll_timeout(qproc->halt_map, qproc->axim1_clk_off, val,
+ !val, 1, Q6SS_CBCR_TIMEOUT_US);
+ if (ret)
+ dev_err(qproc->dev, "failed to enable axim1 clock\n");
+
+ ret = regmap_read_poll_timeout(qproc->halt_map, qproc->crypto_clk_off, val,
+ !val, 1, Q6SS_CBCR_TIMEOUT_US);
+ if (ret)
+ dev_err(qproc->dev, "failed to enable crypto clock\n");
+ }
+
+ q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_mdm);
+ q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_cx);
+ q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi);
+
q6v5_reset_assert(qproc);
q6v5_clk_disable(qproc->dev, qproc->reset_clks,
@@ -1471,6 +1609,7 @@ static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
{
struct of_phandle_args args;
struct resource *res;
+ int halt_cell_cnt = 3;
int ret;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qdsp6");
@@ -1483,8 +1622,11 @@ static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
if (IS_ERR(qproc->rmb_base))
return PTR_ERR(qproc->rmb_base);
+ if (qproc->has_vq6)
+ halt_cell_cnt++;
+
ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
- "qcom,halt-regs", 3, 0, &args);
+ "qcom,halt-regs", halt_cell_cnt, 0, &args);
if (ret < 0) {
dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n");
return -EINVAL;
@@ -1499,6 +1641,52 @@ static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
qproc->halt_modem = args.args[1];
qproc->halt_nc = args.args[2];
+ if (qproc->has_vq6)
+ qproc->halt_vq6 = args.args[3];
+
+ if (qproc->has_qaccept_regs) {
+ ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+ "qcom,qaccept-regs",
+ 3, 0, &args);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to parse qaccept-regs\n");
+ return -EINVAL;
+ }
+
+ qproc->qaccept_mdm = args.args[0];
+ qproc->qaccept_cx = args.args[1];
+ qproc->qaccept_axi = args.args[2];
+ }
+
+ if (qproc->has_ext_cntl_regs) {
+ ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+ "qcom,ext-regs",
+ 2, 0, &args);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to parse ext-regs index 0\n");
+ return -EINVAL;
+ }
+
+ qproc->conn_map = syscon_node_to_regmap(args.np);
+ of_node_put(args.np);
+ if (IS_ERR(qproc->conn_map))
+ return PTR_ERR(qproc->conn_map);
+
+ qproc->force_clk_on = args.args[0];
+ qproc->rscc_disable = args.args[1];
+
+ ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+ "qcom,ext-regs",
+ 2, 1, &args);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to parse ext-regs index 1\n");
+ return -EINVAL;
+ }
+
+ qproc->axim1_clk_off = args.args[0];
+ qproc->crypto_clk_off = args.args[1];
+ }
+
if (qproc->has_spare_reg) {
ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
"qcom,spare-regs",
@@ -1590,7 +1778,7 @@ static int q6v5_init_reset(struct q6v5 *qproc)
return PTR_ERR(qproc->mss_restart);
}
- if (qproc->has_alt_reset || qproc->has_spare_reg) {
+ if (qproc->has_alt_reset || qproc->has_spare_reg || qproc->has_ext_cntl_regs) {
qproc->pdc_reset = devm_reset_control_get_exclusive(qproc->dev,
"pdc_reset");
if (IS_ERR(qproc->pdc_reset)) {
@@ -1697,6 +1885,9 @@ static int q6v5_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, qproc);
+ qproc->has_qaccept_regs = desc->has_qaccept_regs;
+ qproc->has_ext_cntl_regs = desc->has_ext_cntl_regs;
+ qproc->has_vq6 = desc->has_vq6;
qproc->has_spare_reg = desc->has_spare_reg;
ret = q6v5_init_mem(qproc, pdev);
if (ret)
@@ -1857,9 +2048,39 @@ static const struct rproc_hexagon_res sc7180_mss = {
.has_alt_reset = false,
.has_mba_logs = true,
.has_spare_reg = true,
+ .has_qaccept_regs = false,
+ .has_ext_cntl_regs = false,
+ .has_vq6 = false,
.version = MSS_SC7180,
};
+static const struct rproc_hexagon_res sc7280_mss = {
+ .hexagon_mba_image = "mba.mbn",
+ .proxy_clk_names = (char*[]){
+ "xo",
+ NULL
+ },
+ .active_clk_names = (char*[]){
+ "iface",
+ "offline",
+ "snoc_axi",
+ NULL
+ },
+ .proxy_pd_names = (char*[]){
+ "cx",
+ "mss",
+ NULL
+ },
+ .need_mem_protection = true,
+ .has_alt_reset = false,
+ .has_mba_logs = true,
+ .has_spare_reg = false,
+ .has_qaccept_regs = true,
+ .has_ext_cntl_regs = true,
+ .has_vq6 = true,
+ .version = MSS_SC7280,
+};
+
static const struct rproc_hexagon_res sdm845_mss = {
.hexagon_mba_image = "mba.mbn",
.proxy_clk_names = (char*[]){
@@ -1889,6 +2110,9 @@ static const struct rproc_hexagon_res sdm845_mss = {
.has_alt_reset = true,
.has_mba_logs = false,
.has_spare_reg = false,
+ .has_qaccept_regs = false,
+ .has_ext_cntl_regs = false,
+ .has_vq6 = false,
.version = MSS_SDM845,
};
@@ -1917,6 +2141,9 @@ static const struct rproc_hexagon_res msm8998_mss = {
.has_alt_reset = false,
.has_mba_logs = false,
.has_spare_reg = false,
+ .has_qaccept_regs = false,
+ .has_ext_cntl_regs = false,
+ .has_vq6 = false,
.version = MSS_MSM8998,
};
@@ -1948,6 +2175,9 @@ static const struct rproc_hexagon_res msm8996_mss = {
.has_alt_reset = false,
.has_mba_logs = false,
.has_spare_reg = false,
+ .has_qaccept_regs = false,
+ .has_ext_cntl_regs = false,
+ .has_vq6 = false,
.version = MSS_MSM8996,
};
@@ -1990,6 +2220,9 @@ static const struct rproc_hexagon_res msm8916_mss = {
.has_alt_reset = false,
.has_mba_logs = false,
.has_spare_reg = false,
+ .has_qaccept_regs = false,
+ .has_ext_cntl_regs = false,
+ .has_vq6 = false,
.version = MSS_MSM8916,
};
@@ -2040,6 +2273,9 @@ static const struct rproc_hexagon_res msm8974_mss = {
.has_alt_reset = false,
.has_mba_logs = false,
.has_spare_reg = false,
+ .has_qaccept_regs = false,
+ .has_ext_cntl_regs = false,
+ .has_vq6 = false,
.version = MSS_MSM8974,
};
@@ -2050,6 +2286,7 @@ static const struct of_device_id q6v5_of_match[] = {
{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
{ .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss},
{ .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss},
+ { .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss},
{ .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss},
{ },
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
