In preparation to add power sequencer support to qca6390, merge wcnxxxx
and non-wcn codepaths.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/bluetooth/hci_qca.c | 152 +++++++++++++++++-------------------
1 file changed, 71 insertions(+), 81 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 9cc8a9153d76..bb04da08468a 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -84,6 +84,7 @@ enum qca_flags {
enum qca_capabilities {
QCA_CAP_WIDEBAND_SPEECH = BIT(0),
QCA_CAP_VALID_LE_STATES = BIT(1),
+ QCA_CAP_NEEDS_BT_ENABLE = BIT(2),
};
/* HCI_IBS transmit side sleep protocol states */
@@ -203,6 +204,7 @@ struct qca_device_data {
struct qca_vreg *vregs;
size_t num_vregs;
uint32_t capabilities;
+ const char *name;
};
/*
@@ -220,6 +222,7 @@ struct qca_serdev {
u32 init_speed;
u32 oper_speed;
const char *firmware_name;
+ const char *name;
};
static int qca_regulator_enable(struct qca_serdev *qcadev);
@@ -254,6 +257,17 @@ static const char *qca_get_firmware_name(struct hci_uart *hu)
}
}
+static const char *qca_soc_name(struct hci_uart *hu)
+{
+ if (hu->serdev) {
+ struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
+
+ return qsd->name;
+ } else {
+ return "ROME";
+ }
+}
+
static void __serial_clock_on(struct tty_struct *tty)
{
/* TODO: Some chipset requires to enable UART clock on client
@@ -1623,14 +1637,16 @@ static int qca_regulator_init(struct hci_uart *hu)
gpiod_set_value_cansleep(qcadev->bt_en, 0);
msleep(50);
gpiod_set_value_cansleep(qcadev->bt_en, 1);
- msleep(50);
+ msleep(150);
if (qcadev->sw_ctrl) {
sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
}
}
- qca_set_speed(hu, QCA_INIT_SPEED);
+ if (qca_is_wcn399x(soc_type) ||
+ qca_is_wcn6750(soc_type))
+ qca_set_speed(hu, QCA_INIT_SPEED);
if (qca_is_wcn399x(soc_type)) {
ret = qca_send_power_pulse(hu, true);
@@ -1650,7 +1666,9 @@ static int qca_regulator_init(struct hci_uart *hu)
return ret;
}
- hci_uart_set_flow_control(hu, false);
+ if (qca_is_wcn399x(soc_type) ||
+ qca_is_wcn6750(soc_type))
+ hci_uart_set_flow_control(hu, false);
return 0;
}
@@ -1658,8 +1676,6 @@ static int qca_regulator_init(struct hci_uart *hu)
static int qca_power_on(struct hci_dev *hdev)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
- enum qca_btsoc_type soc_type = qca_soc_type(hu);
- struct qca_serdev *qcadev;
struct qca_data *qca = hu->priv;
int ret = 0;
@@ -1669,17 +1685,7 @@ static int qca_power_on(struct hci_dev *hdev)
if (!hu->serdev)
return 0;
- if (qca_is_wcn399x(soc_type) ||
- qca_is_wcn6750(soc_type)) {
- ret = qca_regulator_init(hu);
- } else {
- qcadev = serdev_device_get_drvdata(hu->serdev);
- if (qcadev->bt_en) {
- gpiod_set_value_cansleep(qcadev->bt_en, 1);
- /* Controller needs time to bootup. */
- msleep(150);
- }
- }
+ ret = qca_regulator_init(hu);
clear_bit(QCA_BT_OFF, &qca->flags);
return ret;
@@ -1709,9 +1715,7 @@ static int qca_setup(struct hci_uart *hu)
*/
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
- bt_dev_info(hdev, "setting up %s",
- qca_is_wcn399x(soc_type) ? "wcn399x" :
- (soc_type == QCA_WCN6750) ? "wcn6750" : "ROME/QCA6390");
+ bt_dev_info(hdev, "setting up %s", qca_soc_name(hu));
qca->memdump_state = QCA_MEMDUMP_IDLE;
@@ -1822,6 +1826,7 @@ static const struct qca_device_data qca_soc_data_wcn3990 = {
{ "vddch0", 450000 },
},
.num_vregs = 4,
+ .name = "wcn3990",
};
static const struct qca_device_data qca_soc_data_wcn3991 = {
@@ -1834,6 +1839,7 @@ static const struct qca_device_data qca_soc_data_wcn3991 = {
},
.num_vregs = 4,
.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+ .name = "wcn3991",
};
static const struct qca_device_data qca_soc_data_wcn3998 = {
@@ -1845,11 +1851,14 @@ static const struct qca_device_data qca_soc_data_wcn3998 = {
{ "vddch0", 450000 },
},
.num_vregs = 4,
+ .name = "wcn3998",
};
static const struct qca_device_data qca_soc_data_qca6390 = {
.soc_type = QCA_QCA6390,
.num_vregs = 0,
+ .capabilities = QCA_CAP_NEEDS_BT_ENABLE,
+ .name = "qca6390",
};
static const struct qca_device_data qca_soc_data_wcn6750 = {
@@ -1866,12 +1875,15 @@ static const struct qca_device_data qca_soc_data_wcn6750 = {
{ "vddasd", 200 },
},
.num_vregs = 9,
- .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+ .capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES | QCA_CAP_NEEDS_BT_ENABLE,
+ .name = "wcn6750",
};
static const struct qca_device_data qca_soc_data_default = {
.soc_type = QCA_ROME,
.num_vregs = 0,
+ .capabilities = QCA_CAP_NEEDS_BT_ENABLE,
+ .name = "ROME",
};
static void qca_power_shutdown(struct hci_uart *hu)
@@ -1903,7 +1915,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hu, false);
qca_regulator_disable(qcadev);
- } else if (soc_type == QCA_WCN6750) {
+ } else if (qcadev->bt_en) {
gpiod_set_value_cansleep(qcadev->bt_en, 0);
msleep(100);
qca_regulator_disable(qcadev);
@@ -1911,8 +1923,6 @@ static void qca_power_shutdown(struct hci_uart *hu)
sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
}
- } else if (qcadev->bt_en) {
- gpiod_set_value_cansleep(qcadev->bt_en, 0);
}
set_bit(QCA_BT_OFF, &qca->flags);
@@ -2034,71 +2044,51 @@ static int qca_serdev_probe(struct serdev_device *serdev)
if (!qcadev->oper_speed)
BT_DBG("UART will pick default operating speed");
- if ((qca_is_wcn399x(data->soc_type) ||
- qca_is_wcn6750(data->soc_type))) {
- qcadev->btsoc_type = data->soc_type;
-
- err = qca_init_regulators(&serdev->dev, qcadev, data->vregs,
- data->num_vregs);
- if (err) {
- BT_ERR("Failed to init regulators:%d", err);
- return err;
- }
+ qcadev->name = data->name;
+ qcadev->btsoc_type = data->soc_type;
- qcadev->vregs_on = false;
-
- qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
- GPIOD_OUT_LOW);
- if (!qcadev->bt_en && data->soc_type == QCA_WCN6750) {
- dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
- power_ctrl_enabled = false;
- }
+ err = qca_init_regulators(&serdev->dev, qcadev, data->vregs,
+ data->num_vregs);
+ if (err) {
+ BT_ERR("Failed to init regulators:%d", err);
+ return err;
+ }
- qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
- GPIOD_IN);
- if (!qcadev->sw_ctrl && data->soc_type == QCA_WCN6750)
- dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
+ qcadev->vregs_on = false;
- qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
- if (IS_ERR(qcadev->susclk)) {
- dev_err(&serdev->dev, "failed to acquire clk\n");
- return PTR_ERR(qcadev->susclk);
- }
+ qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
+ GPIOD_OUT_LOW);
+ if (!qcadev->bt_en && (data->capabilities & QCA_CAP_NEEDS_BT_ENABLE)) {
+ dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
+ power_ctrl_enabled = false;
+ }
- err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
- if (err) {
- BT_ERR("wcn3990 serdev registration failed");
- return err;
- }
- } else {
- qcadev->btsoc_type = data->soc_type;
+ qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
+ GPIOD_IN);
+ if (!qcadev->sw_ctrl && data->soc_type == QCA_WCN6750)
+ dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
- qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
- GPIOD_OUT_LOW);
- if (!qcadev->bt_en) {
- dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
- power_ctrl_enabled = false;
- }
+ qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
+ if (IS_ERR(qcadev->susclk)) {
+ dev_err(&serdev->dev, "failed to acquire clk\n");
+ return PTR_ERR(qcadev->susclk);
+ }
- qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
- if (IS_ERR(qcadev->susclk)) {
- dev_warn(&serdev->dev, "failed to acquire clk\n");
- return PTR_ERR(qcadev->susclk);
- }
- err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
- if (err)
- return err;
+ err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
+ if (err)
+ return err;
+ if (!qca_is_wcn399x(qcadev->btsoc_type) &&
+ !qca_is_wcn6750(qcadev->btsoc_type)) {
err = clk_prepare_enable(qcadev->susclk);
if (err)
return err;
+ }
- err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
- if (err) {
- BT_ERR("Rome serdev registration failed");
- clk_disable_unprepare(qcadev->susclk);
- return err;
- }
+ err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+ if (err) {
+ BT_ERR("%s serdev registration failed", qcadev->name);
+ return err;
}
hdev = qcadev->serdev_hu.hdev;
@@ -2127,11 +2117,11 @@ static void qca_serdev_remove(struct serdev_device *serdev)
{
struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
- if ((qca_is_wcn399x(qcadev->btsoc_type) ||
- qca_is_wcn6750(qcadev->btsoc_type)) &&
- qcadev->vregs_on)
+ if (qcadev->vregs_on)
qca_power_shutdown(&qcadev->serdev_hu);
- else if (qcadev->susclk)
+
+ if (!qca_is_wcn399x(qcadev->btsoc_type) &&
+ !qca_is_wcn6750(qcadev->btsoc_type))
clk_disable_unprepare(qcadev->susclk);
hci_uart_unregister_device(&qcadev->serdev_hu);
--
2.30.2
