Re: [PATCHv2 2/3] iommu/io-pgtable: Optimize partial walk flush for large scatter-gather list

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 2021-06-19 03:39, Doug Anderson wrote:
Hi,

On Thu, Jun 17, 2021 at 7:51 PM Sai Prakash Ranjan
<saiprakash.ranjan@xxxxxxxxxxxxxx> wrote:

Currently for iommu_unmap() of large scatter-gather list with page size elements, the majority of time is spent in flushing of partial walks in
__arm_lpae_unmap() which is a VA based TLB invalidation invalidating
page-by-page on iommus like arm-smmu-v2 (TLBIVA) which do not support
range based invalidations like on arm-smmu-v3.2.

For example: to unmap a 32MB scatter-gather list with page size elements (8192 entries), there are 16->2MB buffer unmaps based on the pgsize (2MB for 4K granule) and each of 2MB will further result in 512 TLBIVAs (2MB/4K) resulting in a total of 8192 TLBIVAs (512*16) for 16->2MB causing a huge
overhead.

So instead use tlb_flush_all() callback (TLBIALL/TLBIASID) to invalidate the entire context for partial walk flush on select few platforms where
cost of over-invalidation is less than unmap latency

It would probably be worth punching this description up a little bit.
Elsewhere you said in more detail why this over-invalidation is less
of a big deal for the Qualcomm SMMU. It's probably worth saying
something like that here, too. Like this bit paraphrased from your
other email:

On qcom impl, we have several performance improvements for TLB cache
invalidations in HW like wait-for-safe (for realtime clients such as
camera and display) and few others to allow for cache lookups/updates
when TLBI is in progress for the same context bank.


Sure will add this info as well in the next version.


using the newly
introduced quirk IO_PGTABLE_QUIRK_TLB_INV_ALL. We also do this for
non-strict mode given its all about over-invalidation saving time on
individual unmaps and non-deterministic generally.

As per usual I'm mostly clueless, but I don't quite understand why you
want this new behavior for non-strict mode. To me it almost seems like
the opposite? Specifically, non-strict mode is already outside the
critical path today and so there's no need to optimize it. I'm
probably not explaining myself clearly, but I guess i'm thinking:

a) today for strict, unmap is in the critical path and it's important
to get it out of there. Getting it out of the critical path is so
important that we're willing to over-invalidate to speed up the
critical path.

b) today for non-strict, unmap is not in the critical path.

So I would almost expect your patch to _disable_ your new feature for
non-strict mappings, not auto-enable your new feature for non-strict
mappings.

If I'm babbling, feel free to ignore. ;-) Looking back, I guess Robin
was the one that suggested the behavior you're implementing, so it's
more likely he's right than I am. ;-)


Thanks for taking a look. Non-strict mode is only for leaf entries and
dma domains and this optimization is for non-leaf entries and is applicable for both, see __arm_lpae_unmap(). In other words, if you have iommu.strict=0 (non-strict mode) and try unmapping a large sg buffer as the problem described in the commit text, you would still go via this path in unmap and see the
delay without this patch. So what Robin suggested is that, let's do this
unconditionally for all users with non-strict mode as opposed to only
restricting it to implementation specific in case of strict mode.

Thanks,
Sai

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux