Re: [RFC v1 02/11] clk: qcom: rcg2: Add support for flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16.06.2021 16:10, Robert Foss wrote:
> These changes are ported from the downstream driver, and are used on SM8350
> for CAMCC, DISPCC, GCC, GPUCC & VIDEOCC.
>
> Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
> ---
>  drivers/clk/qcom/clk-rcg.h  | 4 ++++
>  drivers/clk/qcom/clk-rcg2.c | 3 +++
>  2 files changed, 7 insertions(+)
>
> diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
> index 99efcc7f8d88..a1f05281d950 100644
> --- a/drivers/clk/qcom/clk-rcg.h
> +++ b/drivers/clk/qcom/clk-rcg.h
> @@ -149,6 +149,10 @@ struct clk_rcg2 {
>  	const struct freq_tbl	*freq_tbl;
>  	struct clk_regmap	clkr;
>  	u8			cfg_off;
> +	u8			flags;
> +#define FORCE_ENABLE_RCG	BIT(0)
> +#define HW_CLK_CTRL_MODE	BIT(1)
> +#define DFS_SUPPORT		BIT(2)
>  };
>  
>  #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr)
> diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
> index 42f13a2d1cc1..ed2c9b6659cc 100644
> --- a/drivers/clk/qcom/clk-rcg2.c
> +++ b/drivers/clk/qcom/clk-rcg2.c
> @@ -295,6 +295,9 @@ static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
>  	cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
>  	if (rcg->mnd_width && f->n && (f->m != f->n))
>  		cfg |= CFG_MODE_DUAL_EDGE;
> +	if (rcg->flags & HW_CLK_CTRL_MODE)
> +		cfg |= CFG_HW_CLK_CTRL_MASK;
> +
>  	return regmap_update_bits(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg),
>  					mask, cfg);
>  }

What about code for handling other flags? If it's not a part of the series,

I don't think it makes sense to define them. Or perhaps you sent the

wrong revision?


Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux