[PATCH V2] arm64: dts: qcom: sc7180: Add xo clock for eMMC and Sd card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add XO clock for eMMC and SDCard as it would help in calculating dll
register values.

Signed-off-by: Shaik Sajida Bhanu <sbhanu@xxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---

Changes since V1:
	- Updated commit message as suggested by Bjorn Andersson.
	- Added space after before xo clock name as suggested by
	  Konrad Dybcio.
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 52115e0..fb1d9ad 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -701,8 +701,9 @@
 			interrupt-names = "hc_irq", "pwr_irq";
 
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-					<&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "core", "iface", "xo";
 			interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
 			interconnect-names = "sdhc-ddr","cpu-sdhc";
@@ -2564,8 +2565,9 @@
 			interrupt-names = "hc_irq", "pwr_irq";
 
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-					<&gcc GCC_SDCC2_AHB_CLK>;
-			clock-names = "core", "iface";
+				 <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "core", "iface", "xo";
 
 			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux