On Tue 15 Jun 19:58 CDT 2021, Konrad Dybcio wrote:
[..]
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
[..]
> @@ -3490,6 +3508,89 @@ data {
> bias-pull-up;
> };
> };
> +
> + pcie0_default_state: pcie0-default {
I thought I answered the other way around (that it should be in the
board file), that said I don't think these are moving much, so I'm not
against keeping them here.
> + pcie0_perst_default: perst {
> + pins = "gpio79";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + clkreq {
> + pins = "gpio80";
> + function = "pci_e0";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + wake {
> + pins = "gpio81";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
[..]
> +
> + mdm2ap_default: mdm2ap-default {
These however are presumably only present on devices with SDX55, so
please move these two to your board file.
Thanks,
Bjorn
