Hi,
> +
> + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&vreg_l10a_2p96>;
> + vcc-max-microamp = <750000>;
> + vccq-supply = <&vreg_l5c_1p2>;
> + vccq-max-microamp = <700000>;
> + vccq2-supply = <&vreg_s4a_1p8>;
> + vccq2-max-microamp = <750000>;
You need to add "regulator-allow-set-load;" to the mentioned supplies,
as you're controlling the amperage here.
> +};
> +
> +&ufs_mem_phy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l8c_1p2>;
> + vdda-max-microamp = <87100>;
> + vdda-pll-supply = <&vreg_l5a_0p88>;
> + vdda-pll-max-microamp = <18300>;
Ditto
Konrad
