[PATCH net-next 3/3] net: wwan: Allow WWAN drivers to provide blocking tx and poll function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



At the moment, the WWAN core provides wwan_port_txon/off() to implement
blocking writes. The tx() port operation should not block, instead
wwan_port_txon/off() should be called when the TX queue is full or has
free space again.

However, in some cases it is not straightforward to make use of that
functionality. For example, the RPMSG API used by rpmsg_wwan_ctrl.c
does not provide any way to be notified when the TX queue has space
again. Instead, it only provides the following operations:

  - rpmsg_send(): blocking write (wait until there is space)
  - rpmsg_trysend(): non-blocking write (return error if no space)
  - rpmsg_poll(): set poll flags depending on TX queue state

Generally that's totally sufficient for implementing a char device,
but it does not fit well to the currently provided WWAN port ops.

Most of the time, using the non-blocking rpmsg_trysend() in the
WWAN tx() port operation works just fine. However, with high-frequent
writes to the char device it is possible to trigger a situation
where this causes issues. For example, consider the following
(somewhat unrealistic) example:

 # dd if=/dev/zero bs=1000 of=/dev/wwan0p2QMI
 dd: error writing '/dev/wwan0p2QMI': Resource temporarily unavailable
 1+0 records out

This fails immediately after writing the first record. It's likely
only a matter of time until this triggers issues for some real application
(e.g. ModemManager sending a lot of large QMI packets).

The rpmsg_char device does not have this problem, because it uses
rpmsg_trysend() and rpmsg_poll() to support non-blocking operations.
Make it possible to use the same in the RPMSG WWAN driver by extending
the tx() operation with a "nonblock" parameter and adding an optional
poll() callback. This integrates nicely with the RPMSG API and does
not break other WWAN drivers.

With these changes, the dd example above blocks instead of exiting
with an error.

Cc: Loic Poulain <loic.poulain@xxxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
Note that rpmsg_poll() is an optional callback currently only implemented
by the qcom_smd RPMSG provider. However, it should be easy to implement
this for other RPMSG providers when needed.

Another potential solution suggested by Loic Poulain in [1] is to always
use the blocking rpmsg_send() from a workqueue/kthread and disable TX
until it is done. I think this could also work (perhaps a bit more
difficult to implement) but the main disadvantage is that I don't see
a way to return any kind of error to the client with this approach.
I assume we return immediately from the write() to the char device
after scheduling the rpmsg_send(), so we already reported success
when rpmsg_send() returns.

At the end all that matters to me is that it works properly, so I'm
open for any other suggestions. :)

[1]: https://lore.kernel.org/linux-arm-msm/CAMZdPi_-Qa=JnThHs_h-144dAfSAjF5s+QdBawdXZ3kk8Mx8ng@xxxxxxxxxxxxxx/
---
 drivers/net/wwan/iosm/iosm_ipc_port.c |  3 ++-
 drivers/net/wwan/mhi_wwan_ctrl.c      |  3 ++-
 drivers/net/wwan/rpmsg_wwan_ctrl.c    | 17 +++++++++++++++--
 drivers/net/wwan/wwan_core.c          |  9 ++++++---
 drivers/net/wwan/wwan_hwsim.c         |  3 ++-
 include/linux/wwan.h                  | 13 +++++++++----
 6 files changed, 36 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wwan/iosm/iosm_ipc_port.c b/drivers/net/wwan/iosm/iosm_ipc_port.c
index beb944847398..2f874e41ceff 100644
--- a/drivers/net/wwan/iosm/iosm_ipc_port.c
+++ b/drivers/net/wwan/iosm/iosm_ipc_port.c
@@ -31,7 +31,8 @@ static void ipc_port_ctrl_stop(struct wwan_port *port)
 }
 
 /* transfer control data to modem */
-static int ipc_port_ctrl_tx(struct wwan_port *port, struct sk_buff *skb)
+static int ipc_port_ctrl_tx(struct wwan_port *port, struct sk_buff *skb,
+			    bool nonblock)
 {
 	struct iosm_cdev *ipc_port = wwan_port_get_drvdata(port);
 
diff --git a/drivers/net/wwan/mhi_wwan_ctrl.c b/drivers/net/wwan/mhi_wwan_ctrl.c
index 1bc6b69aa530..9754f014d348 100644
--- a/drivers/net/wwan/mhi_wwan_ctrl.c
+++ b/drivers/net/wwan/mhi_wwan_ctrl.c
@@ -139,7 +139,8 @@ static void mhi_wwan_ctrl_stop(struct wwan_port *port)
 	mhi_unprepare_from_transfer(mhiwwan->mhi_dev);
 }
 
-static int mhi_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb)
+static int mhi_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb,
+			    bool nonblock)
 {
 	struct mhi_wwan_dev *mhiwwan = wwan_port_get_drvdata(port);
 	int ret;
diff --git a/drivers/net/wwan/rpmsg_wwan_ctrl.c b/drivers/net/wwan/rpmsg_wwan_ctrl.c
index de226cdb69fd..63f431eada39 100644
--- a/drivers/net/wwan/rpmsg_wwan_ctrl.c
+++ b/drivers/net/wwan/rpmsg_wwan_ctrl.c
@@ -54,12 +54,16 @@ static void rpmsg_wwan_ctrl_stop(struct wwan_port *port)
 	rpwwan->ept = NULL;
 }
 
-static int rpmsg_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb)
+static int rpmsg_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb,
+			      bool nonblock)
 {
 	struct rpmsg_wwan_dev *rpwwan = wwan_port_get_drvdata(port);
 	int ret;
 
-	ret = rpmsg_trysend(rpwwan->ept, skb->data, skb->len);
+	if (nonblock)
+		ret = rpmsg_trysend(rpwwan->ept, skb->data, skb->len);
+	else
+		ret = rpmsg_send(rpwwan->ept, skb->data, skb->len);
 	if (ret)
 		return ret;
 
@@ -67,10 +71,19 @@ static int rpmsg_wwan_ctrl_tx(struct wwan_port *port, struct sk_buff *skb)
 	return 0;
 }
 
+static __poll_t rpmsg_wwan_ctrl_poll(struct wwan_port *port, struct file *filp,
+				     poll_table *wait)
+{
+	struct rpmsg_wwan_dev *rpwwan = wwan_port_get_drvdata(port);
+
+	return rpmsg_poll(rpwwan->ept, filp, wait);
+}
+
 static const struct wwan_port_ops rpmsg_wwan_pops = {
 	.start = rpmsg_wwan_ctrl_start,
 	.stop = rpmsg_wwan_ctrl_stop,
 	.tx = rpmsg_wwan_ctrl_tx,
+	.poll = rpmsg_wwan_ctrl_poll,
 };
 
 static struct device *rpmsg_wwan_find_parent(struct device *dev)
diff --git a/drivers/net/wwan/wwan_core.c b/drivers/net/wwan/wwan_core.c
index 7e728042fc41..c7fd0b897f87 100644
--- a/drivers/net/wwan/wwan_core.c
+++ b/drivers/net/wwan/wwan_core.c
@@ -500,7 +500,8 @@ static void wwan_port_op_stop(struct wwan_port *port)
 	mutex_unlock(&port->ops_lock);
 }
 
-static int wwan_port_op_tx(struct wwan_port *port, struct sk_buff *skb)
+static int wwan_port_op_tx(struct wwan_port *port, struct sk_buff *skb,
+			   bool nonblock)
 {
 	int ret;
 
@@ -510,7 +511,7 @@ static int wwan_port_op_tx(struct wwan_port *port, struct sk_buff *skb)
 		goto out_unlock;
 	}
 
-	ret = port->ops->tx(port, skb);
+	ret = port->ops->tx(port, skb, nonblock);
 
 out_unlock:
 	mutex_unlock(&port->ops_lock);
@@ -637,7 +638,7 @@ static ssize_t wwan_port_fops_write(struct file *filp, const char __user *buf,
 		return -EFAULT;
 	}
 
-	ret = wwan_port_op_tx(port, skb);
+	ret = wwan_port_op_tx(port, skb, !!(filp->f_flags & O_NONBLOCK));
 	if (ret) {
 		kfree_skb(skb);
 		return ret;
@@ -659,6 +660,8 @@ static __poll_t wwan_port_fops_poll(struct file *filp, poll_table *wait)
 		mask |= EPOLLIN | EPOLLRDNORM;
 	if (!port->ops)
 		mask |= EPOLLHUP | EPOLLERR;
+	else if (port->ops->poll)
+		mask |= port->ops->poll(port, filp, wait);
 
 	return mask;
 }
diff --git a/drivers/net/wwan/wwan_hwsim.c b/drivers/net/wwan/wwan_hwsim.c
index 472cae544a2b..e5ecbc70658d 100644
--- a/drivers/net/wwan/wwan_hwsim.c
+++ b/drivers/net/wwan/wwan_hwsim.c
@@ -83,7 +83,8 @@ static void wwan_hwsim_port_stop(struct wwan_port *wport)
  *
  * Be aware that this processor is not fully V.250 compliant.
  */
-static int wwan_hwsim_port_tx(struct wwan_port *wport, struct sk_buff *in)
+static int wwan_hwsim_port_tx(struct wwan_port *wport, struct sk_buff *in,
+			      bool nonblock)
 {
 	struct wwan_hwsim_port *port = wwan_port_get_drvdata(wport);
 	struct sk_buff *out;
diff --git a/include/linux/wwan.h b/include/linux/wwan.h
index 430a3a0817de..d7c8c6ac7594 100644
--- a/include/linux/wwan.h
+++ b/include/linux/wwan.h
@@ -6,6 +6,7 @@
 
 #include <linux/device.h>
 #include <linux/kernel.h>
+#include <linux/poll.h>
 #include <linux/skbuff.h>
 #include <linux/netlink.h>
 
@@ -38,17 +39,21 @@ enum wwan_port_type {
 struct wwan_port;
 
 /** struct wwan_port_ops - The WWAN port operations
- * @start: The routine for starting the WWAN port device.
- * @stop: The routine for stopping the WWAN port device.
+ * @start: The routine for starting the WWAN port device. Required.
+ * @stop: The routine for stopping the WWAN port device. Required.
  * @tx: The routine that sends WWAN port protocol data to the device.
+ *      May only block if nonblock is false. Required.
+ * @poll: A routine to set additional poll flags. Optional.
  *
  * The wwan_port_ops structure contains a list of low-level operations
- * that control a WWAN port device. All functions are mandatory.
+ * that control a WWAN port device.
  */
 struct wwan_port_ops {
 	int (*start)(struct wwan_port *port);
 	void (*stop)(struct wwan_port *port);
-	int (*tx)(struct wwan_port *port, struct sk_buff *skb);
+	int (*tx)(struct wwan_port *port, struct sk_buff *skb, bool nonblock);
+	__poll_t (*poll)(struct wwan_port *port, struct file *filp,
+			 poll_table *wait);
 };
 
 /**
-- 
2.32.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux