[PATCH] arm64: dts: qcom: qrb5165-rb5: Fix up pins

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>]

In the SDHCI pin commonization commit I overlooked the fact that this
board had the pins defined in its own DT. Revert their settings to the
original values.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 38 ++++++++----------------
 arch/arm64/boot/dts/qcom/sm8250.dtsi     |  4 +--
 2 files changed, 14 insertions(+), 28 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index a5b742325261..bf05328f3901 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -858,6 +858,18 @@ dai@2 {
 	};
 };
 
+&sdc2_card_det_n {
+	/delete-property/ drive-strength;
+};
+
+&sdc2_cmd_default {
+	drive-strength = <10>;
+};
+
+&sdc2_data_default {
+	drive-strength = <10>;
+};
+
 &sdhc_2 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -1253,32 +1265,6 @@ wake-n {
 			bias-pull-up;
 		};
 	};
-
-	sdc2_default_state: sdc2-default {
-		clk {
-			pins = "sdc2_clk";
-			bias-disable;
-			drive-strength = <16>;
-		};
-
-		cmd {
-			pins = "sdc2_cmd";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-
-		data {
-			pins = "sdc2_data";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-	};
-
-	sdc2_card_det_n: sd-card-det-n {
-		pins = "gpio77";
-		function = "gpio";
-		bias-pull-up;
-	};
 };
 
 &uart12 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index fe858abbff5d..fab5d83f4496 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3414,13 +3414,13 @@ clk {
 					bias-disable;
 				};
 
-				cmd {
+				sdc2_cmd_default: cmd {
 					pins = "sdc2_cmd";
 					drive-strength = <16>;
 					bias-pull-up;
 				};
 
-				data {
+				sdc2_data_default: data {
 					pins = "sdc2_data";
 					drive-strength = <16>;
 					bias-pull-up;
-- 
2.32.0