Caught this when looking at alpha-pll code. Untested but it is clear that
this was intended to write to PLL_CAL_L_VAL and not PLL_ALPHA_VAL.
Fixes: 691865bad627 ("clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration")
Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
drivers/clk/qcom/clk-alpha-pll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 94b53c7db2f7f..eaedcceb766f9 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -1255,7 +1255,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
return ret;
/* Setup PLL for calibration frequency */
- regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), cal_l);
+ regmap_write(pll->clkr.regmap, PLL_CAL_L_VAL(pll), cal_l);
/* Bringup the PLL at calibration frequency */
ret = clk_alpha_pll_enable(hw);
--
2.26.1
