[PATCH v3 0/3] drm/msm/dsi: support CPHY mode for 7nm pll/phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the required changes to support 7nm pll/phy in CPHY mode.

This adds a "qcom,dsi-phy-cphy-mode" property for the PHY node to enable
the CPHY mode.

v2:
 - rebased on DSI PHY reworks
 - reworked getting cphy_mode in dsi_host.c
 - documentation change in separate patch

v3:
 - yaml bindings
 - changed binding to "phy-mode = <PHY_TYPE_DSI_CPHY>;"

Jonathan Marek (3):
  dt-bindings: msm: dsi: add missing 7nm bindings
  dt-bindings: msm: dsi: document phy-type property for 7nm dsi phy
  drm/msm/dsi: support CPHY mode for 7nm pll/phy

 .../bindings/display/msm/dsi-phy-7nm.yaml     |  70 +++++++++
 drivers/gpu/drm/msm/dsi/dsi.xml.h             |   2 +
 drivers/gpu/drm/msm/dsi/dsi_host.c            |  34 +++-
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c         |  49 ++++++
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h         |   3 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c     | 145 ++++++++++++------
 include/dt-bindings/phy/phy.h                 |   2 +
 7 files changed, 258 insertions(+), 47 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml

-- 
2.26.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux