Putting the panel under the bridge chip (under the aux-bus node) allows the panel driver to get access to the DP AUX bus, enabling all sorts of fabulous new features. While we're at this, get rid of a level of hierarchy for the panel node. It doesn't need "ports / port" and can just have a "port" child. For Linux, this patch has a hard requirement on the patches adding DP AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch ("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus"). Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- (no changes since v7) Changes in v7: - Panel now under bridge chip instead of getting a link to ddc-i2c arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 30 ++++++++++---------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 24d293ef56d7..c76afd857b54 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -260,21 +260,6 @@ max98357a: audio-codec-0 { #sound-dai-cells = <0>; }; - panel: panel { - /* Compatible will be filled in per-board */ - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - ports { - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; - pwmleds { compatible = "pwm-leds"; keyboard_backlight: keyboard-backlight { @@ -674,6 +659,21 @@ sn65dsi86_out: endpoint { }; }; }; + + aux-bus { + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; }; }; -- 2.32.0.rc1.229.g3e70b5a671-goog