SA8155p-adp PMICs (PMM8155AU_1 and PMM8155AU_2) expose
the following PMIC GPIO blocks:
- PMM8155AU_1: gpio1-gpio10 (with holes on gpio2, gpio5, gpio7 and gpio8)
- PMM8155AU_2: gpio1-gpio10 (with holes on gpio2, gpio5, gpio7)
Add support for the same in the pinctrl driver.
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Liam Girdwood <lgirdwood@xxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-gpio@xxxxxxxxxxxxxxx
Cc: bhupesh.linux@xxxxxxxxx
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 00870da0c94e..890c44b6e198 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1127,6 +1127,10 @@ static const struct of_device_id pmic_gpio_of_match[] = {
{ .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
/* pm8150l has 12 GPIOs with holes on 7 */
{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
+ /* pmm8155au-1 has 10 GPIOs with holes on 2, 5, 7 and 8 */
+ { .compatible = "qcom,pmm8155au-1-gpio", .data = (void *) 10 },
+ /* pmm8155au-2 has 10 GPIOs with holes on 2, 5 and 7 */
+ { .compatible = "qcom,pmm8155au-2-gpio", .data = (void *) 10 },
{ .compatible = "qcom,pm8350-gpio", .data = (void *) 10 },
{ .compatible = "qcom,pm8350b-gpio", .data = (void *) 8 },
{ .compatible = "qcom,pm8350c-gpio", .data = (void *) 9 },
--
2.31.1
