On Fri 04 Jun 08:54 CDT 2021, Roja Rani Yarubandi wrote:
> Add QUPv3 wrapper_1 DT nodes for SC7280 SoC.
>
> Signed-off-by: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
> ---
> Changes in V3:
> - Broken the huge V2 patch into 3 smaller patches.
> 1. QSPI DT nodes
> 2. QUP wrapper_0 DT nodes
> 3. QUP wrapper_1 DT nodes
>
> Changes in V2:
> - As per Doug's comments removed pinmux/pinconf subnodes.
> - As per Doug's comments split of SPI, UART nodes has been done.
> - Moved QSPI node before aps_smmu as per the order.
>
> arch/arm64/boot/dts/qcom/sc7280-idp.dts | 4 +
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 751 ++++++++++++++++++++++++
> 2 files changed, 755 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> index f57458dbe763..bdea9bf4eeca 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> @@ -288,6 +288,10 @@ &qupv3_id_0 {
> status = "okay";
> };
>
> +&qupv3_id_1 {
> + status = "okay";
> +};
> +
> &uart5 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index b783f5622a66..348a34f3448e 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -881,6 +881,437 @@ uart7: serial@99c000 {
> };
> };
>
> + qupv3_id_1: geniqup@ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0 0x00ac0000 0 0x2000>;
> + clock-names = "m-ahb", "s-ahb";
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + iommus = <&apps_smmu 0x43 0x0>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
> + interconnect-names = "qup-core";
We used to have interconnect votes for the wrapper, but I recently
merged patches that dropped these for sc7180, so please conclude which
way this should be.
The rest looks good.
Regards,
Bjorn
