Hi Rob,
On Fri, 21 May 2021 at 07:15, Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Wed, May 19, 2021 at 08:06:47PM +0530, Bhupesh Sharma wrote:
> > Convert Qualcomm QCE crypto devicetree binding to YAML.
> >
> > Cc: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
> > Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: Andy Gross <agross@xxxxxxxxxx>
> > Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
> > Cc: David S. Miller <davem@xxxxxxxxxxxxx>
> > Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
> > Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
> > Cc: Vinod Koul <vkoul@xxxxxxxxxx>
> > Cc: dmaengine@xxxxxxxxxxxxxxx
> > Cc: linux-clk@xxxxxxxxxxxxxxx
> > Cc: linux-crypto@xxxxxxxxxxxxxxx
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Cc: bhupesh.linux@xxxxxxxxx
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > ---
> > .../devicetree/bindings/crypto/qcom-qce.txt | 25 -------
> > .../devicetree/bindings/crypto/qcom-qce.yaml | 69 +++++++++++++++++++
> > 2 files changed, 69 insertions(+), 25 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt
> > create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
> > deleted file mode 100644
> > index fdd53b184ba8..000000000000
> > --- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt
> > +++ /dev/null
> > @@ -1,25 +0,0 @@
> > -Qualcomm crypto engine driver
> > -
> > -Required properties:
> > -
> > -- compatible : should be "qcom,crypto-v5.1"
> > -- reg : specifies base physical address and size of the registers map
> > -- clocks : phandle to clock-controller plus clock-specifier pair
> > -- clock-names : "iface" clocks register interface
> > - "bus" clocks data transfer interface
> > - "core" clocks rest of the crypto block
> > -- dmas : DMA specifiers for tx and rx dma channels. For more see
> > - Documentation/devicetree/bindings/dma/dma.txt
> > -- dma-names : DMA request names should be "rx" and "tx"
> > -
> > -Example:
> > - crypto@fd45a000 {
> > - compatible = "qcom,crypto-v5.1";
> > - reg = <0xfd45a000 0x6000>;
> > - clocks = <&gcc GCC_CE2_AHB_CLK>,
> > - <&gcc GCC_CE2_AXI_CLK>,
> > - <&gcc GCC_CE2_CLK>;
> > - clock-names = "iface", "bus", "core";
> > - dmas = <&cryptobam 2>, <&cryptobam 3>;
> > - dma-names = "rx", "tx";
> > - };
> > diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
> > new file mode 100644
> > index 000000000000..a691cd08f372
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
> > @@ -0,0 +1,69 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm crypto engine driver
> > +
> > +maintainers:
> > + - Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > +
> > +description: |
> > + This document defines the binding for the QCE crypto
> > + controller found on Qualcomm parts.
> > +
> > +properties:
> > + compatible:
> > + const: qcom,crypto-v5.1
> > +
> > + reg:
> > + maxItems: 1
> > + description: |
> > + Specifies base physical address and size of the registers map.
>
> Yep, that's every 'reg'. Drop.
>
> With that dropped,
>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Ok, I will drop this in v4.
Thanks,
Bhupesh
> > +
> > + clocks:
> > + items:
> > + - description: iface clocks register interface.
> > + - description: bus clocks data transfer interface.
> > + - description: core clocks rest of the crypto block.
> > +
> > + clock-names:
> > + items:
> > + - const: iface
> > + - const: bus
> > + - const: core
> > +
> > + dmas:
> > + items:
> > + - description: DMA specifiers for tx dma channel.
> > + - description: DMA specifiers for rx dma channel.
> > +
> > + dma-names:
> > + items:
> > + - const: rx
> > + - const: tx
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - clock-names
> > + - dmas
> > + - dma-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/qcom,gcc-apq8084.h>
> > + crypto-engine@fd45a000 {
> > + compatible = "qcom,crypto-v5.1";
> > + reg = <0xfd45a000 0x6000>;
> > + clocks = <&gcc GCC_CE2_AHB_CLK>,
> > + <&gcc GCC_CE2_AXI_CLK>,
> > + <&gcc GCC_CE2_CLK>;
> > + clock-names = "iface", "bus", "core";
> > + dmas = <&cryptobam 2>, <&cryptobam 3>;
> > + dma-names = "rx", "tx";
> > + };
> > --
> > 2.31.1
> >
