Re: [PATCH v2] arm64/dts/qcom/sc7180: Add Display Port dt node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-06-03 09:53, Bjorn Andersson wrote:
On Thu 03 Jun 11:09 CDT 2021, Kuogee Hsieh wrote:

Add DP device node on sc7180.

Changes in v2:
-- replace msm_dp with dp
-- replace dp_opp_table with opp_table


I'm sorry for those suggestions, I don't like either one of them.

And for everything but changes to the DRM code the changelog goes below
the --- line, so it's not part of the git history.

Signed-off-by: Kuogee Hsieh <khsieh@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi |  9 ++++
arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++
 2 files changed, 87 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 24d293e..40367a2 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -786,6 +786,15 @@ hp_i2c: &i2c9 {
 	status = "okay";
 };

+&dp {
+        status = "okay";
+        pinctrl-names = "default";
+        pinctrl-0 = <&dp_hot_plug_det>;
+        data-lanes = <0 1>;

Is it a limitation of the EC in Trogdor that you can only do 2 lanes?

+        vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>;
+        vdda-0p9-supply = <&vdda_usb_ss_dp_core>;
+};
+
 &pm6150_adc {
 	charger-thermistor@4f {
 		reg = <ADC5_AMUX_THM3_100K_PU>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6228ba2..05a4133 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3032,6 +3032,13 @@
 							remote-endpoint = <&dsi0_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp_in>;
+						};
+					};
 				};

 				mdp_opp_table: mdp-opp-table {
@@ -3148,6 +3155,77 @@

 				status = "disabled";
 			};
+
+			dp: displayport-controller@ae90000 {

If you label this "mdss_dp", then it will naturally group with other
mdss properties in trogdor.dtsi (which should be sorted alphabetically).

+				compatible = "qcom,sc7180-dp";
+				status = "disabled";
+
+				reg = <0 0x0ae90000 0 0x1400>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface", "core_aux", "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				#clock-cells = <1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;

Just curious, but isn't the DP block in the MDSS_GDCS? Or do we need to
mention CX here in order for the opp framework to apply required-opps
of CX?

yes,

+
+				#sound-dai-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dp_out: endpoint { };
+					};
+				};
+
+				opp_table: dp-opp-table {

The one and only "opp_table" of the sc7180 :)
Maybe name it dp_opp_table instead?

Regards,
Bjorn

+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+
 		};

 		dispcc: clock-controller@af00000 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux