Re: [PATCH v5] drm/msm/dp: power off DP phy at suspend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Can you Cc dri-devel?

Quoting Kuogee Hsieh (2021-06-03 08:40:46)
> Normal DP suspend operation contains two steps, display off followed
> by dp suspend, to complete system wide suspending cycle if display is
> up at that time. In this case, DP phy will be powered off at display
> off. However there is an exception case that depending on the timing
> of dongle plug in during system wide suspending, sometimes display off
> procedure may be skipped and dp suspend was called directly. In this
> case, dp phy is stay at powered on (phy->power_count = 1) so that at
> next resume dp driver crash at main link clock enable due to phy is
> not physically powered on. This patch will call dp_ctrl_off_link_stream()
> to tear down main link and power off phy at dp_pm_suspend() if main link
> had been brought up.
>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux