Re: [PATCH v8 02/11] dt-bindings: drm: Introduce the DP AUX bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 24 May 2021 17:01:50 -0700, Douglas Anderson wrote:
> We want to be able to list an eDP panel as a child of an eDP
> controller node to represent the fact that the panel is connected to
> the controller's DP AUX bus. Though the panel and the controller are
> connected in several ways, the DP AUX bus is the primary control
> interface between the two and thus makes the most sense to model in
> device tree hierarchy.
> 
> Listing a panel in this way makes it possible for the panel driver to
> easily get access to the DP AUX bus that it resides on, which can be
> useful to help in auto-detecting the panel and for turning on various
> bits.
> 
> NOTE: historically eDP panels were _not_ listed under their controller
> but were listed at the top level of the device tree. This will still
> be supported for backward compatibility (and while DP controller
> drivers are adapted to support the new DT syntax) but should be
> considered deprecated since there is no downside to listing the panel
> under the controller.
> 
> For now, the DP AUX bus bindings will only support an eDP panel
> underneath. It's possible it could be extended to allow having a DP
> connector under it in the future.
> 
> The idea for this bus's design was hashed out over IRC [1].
> 
> [1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&date=2021-05-11
> 
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
> My DT yaml-fu is still weak. If I did something stupid, please help me
> learn how to do this better!
> 
> NOTE: there is no "Example" in this bindings file. Yikes! This is
> because I wanted to keep this patch separate from the one that enables
> the first eDP controller. See the patch ("dt-bindings: drm/aux-bus:
> Add an example") for the example.
> 
> ALSO: if anyone else would like to be listed as a "Maintainer" in this
> file then please shout!
> 
> Changes in v8:
> - Separate DP AUX bus binding is new for v8.
> 
>  .../bindings/display/dp-aux-bus.yaml          | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/dp-aux-bus.yaml
> 

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux