Re: [PATCH 2/2] perf: qcom_l2_pmu: move to use request_irq by IRQF_NO_AUTOEN flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 02, 2021 at 09:00:42AM +0800, Tian Tao wrote:
> request_irq() after setting IRQ_NOAUTOEN as below
> irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can
> be replaced by request_irq() with IRQF_NO_AUTOEN flag.
> 
> this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which
> is being merged: https://lore.kernel.org/patchwork/patch/1388765/
> 
> Signed-off-by: Tian Tao <tiantao6@xxxxxxxxxxxxx>

As with patch 1, I see that the patch above was merged in v5.13-rc1 as commit:

  cbe16f35bee6880b ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()")

With that in mind:

Acked-by: Mark Rutland <mark.rutland@xxxxxxx>

I expect Will will pick this up.

Thanks,
Mark.

> ---
>  drivers/perf/qcom_l2_pmu.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c
> index fc54a80..b60e301 100644
> --- a/drivers/perf/qcom_l2_pmu.c
> +++ b/drivers/perf/qcom_l2_pmu.c
> @@ -869,14 +869,14 @@ static int l2_cache_pmu_probe_cluster(struct device *dev, void *data)
>  	irq = platform_get_irq(sdev, 0);
>  	if (irq < 0)
>  		return irq;
> -	irq_set_status_flags(irq, IRQ_NOAUTOEN);
>  	cluster->irq = irq;
>  
>  	cluster->l2cache_pmu = l2cache_pmu;
>  	cluster->on_cpu = -1;
>  
>  	err = devm_request_irq(&pdev->dev, irq, l2_cache_handle_irq,
> -			       IRQF_NOBALANCING | IRQF_NO_THREAD,
> +			       IRQF_NOBALANCING | IRQF_NO_THREAD |
> +			       IRQF_NO_AUTOEN,
>  			       "l2-cache-pmu", cluster);
>  	if (err) {
>  		dev_err(&pdev->dev,
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux