Hello:
This series was applied to qcom/linux.git (refs/heads/for-next):
On Mon, 29 Mar 2021 18:28:17 -0700 you wrote:
> Allow handling EDL mode after SYS_ERROR occurs by reading the execution
> environment post handling and move to power on reset state to accommodate the
> scenario.
> Handle EDL mode properly and wait for ready instead of just exiting from the
> firmware load.
> Allow use of the Flash Programmer execution environment as a mission mode
> use case for a blank NAND power up scenario.
> Always attempt a wait for MHI ready state as device could be waiting for the
> host to do so after pass through execution environment is seen.
> Introduce patch to improve state awareness and aid in debugging.
>
> [...]
Here is the summary with links:
- [v1,1/7] bus: mhi: core: Rely on accurate method to determine EDL mode
https://git.kernel.org/qcom/c/418bec695696
- [v1,2/7] bus: mhi: core: Wait for ready after an EDL firmware download
https://git.kernel.org/qcom/c/4f214496ac74
- [v1,3/7] bus: mhi: core: Handle EDL mode entry appropriately
https://git.kernel.org/qcom/c/ad416db9fabe
- [v1,4/7] bus: mhi: core: Add support for Flash Programmer execution environment
https://git.kernel.org/qcom/c/66ac7985b2af
- [v1,5/7] bus: mhi: core: Identify Flash Programmer as a mission mode use case
https://git.kernel.org/qcom/c/d20e82d4d016
- [v1,6/7] bus: mhi: core: Wait for MHI READY state in most scenarios
https://git.kernel.org/qcom/c/e72919cebd19
- [v1,7/7] bus: mhi: core: Improve state strings for debug messages
https://git.kernel.org/qcom/c/19e60d6e88a6
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
