[PATCH v8 04/11] dt-bindings: drm/aux-bus: Add an example

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now that we have an eDP controller that lists aux-bus, we can safely
add an example to the aux-bus bindings.

NOTE: this example is just a copy of the one in the 'ti-sn65dsi86'
one. It feels useful to have the example in both places simply because
it's important to document the interaction between the two bindings in
both places.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

Changes in v8:
- Separate DP AUX bus binding is new for v8.

 .../bindings/display/dp-aux-bus.yaml          | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
index 5e4afe9f98fb..43494d2a32a1 100644
--- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
+++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
@@ -35,3 +35,68 @@ additionalProperties: false
 
 required:
   - panel
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "boe,nv133fhm-n62";
+            power-supply = <&pp3300_dx_edp>;
+            backlight = <&backlight>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };
-- 
2.31.1.818.g46aad6cb9e-goog




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux