[PATCH 1/1] arm64: dts: qcom: Separate each group of data in the property 'reg'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Do not write the 'reg' of multiple groups of data into a uint32 array,
use <> to separate them. Otherwise, the errors similar to the following
will be reported by reg.yaml.

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml:
 soc: pci@10000000:reg:0: \
 [268435456, 3869, 268439328, 168, 557056, 8192, 269484032, 4096] is too long

Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a32e5e79ab0b754..e8db62470b23059 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -567,10 +567,10 @@ frame@b128000 {
 
 		pcie1: pci@10000000 {
 			compatible = "qcom,pcie-ipq8074";
-			reg =  <0x10000000 0xf1d
-				0x10000f20 0xa8
-				0x00088000 0x2000
-				0x10100000 0x1000>;
+			reg =  <0x10000000 0xf1d>,
+			       <0x10000f20 0xa8>,
+			       <0x00088000 0x2000>,
+			       <0x10100000 0x1000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <1>;
@@ -629,10 +629,10 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 
 		pcie0: pci@20000000 {
 			compatible = "qcom,pcie-ipq8074";
-			reg =  <0x20000000 0xf1d
-				0x20000f20 0xa8
-				0x00080000 0x2000
-				0x20100000 0x1000>;
+			reg = <0x20000000 0xf1d>,
+			      <0x20000f20 0xa8>,
+			      <0x00080000 0x2000>,
+			      <0x20100000 0x1000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
-- 
2.26.0.106.g9fadedd





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux