make dtbs_check:
ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$'
ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+'
There is no "smsc,irq-active-low" property, as active low is the
default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index dace8ffeb99118cb..0a4ffd10c48464f5 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -581,7 +581,7 @@ external-bus@1a100000 {
* EBI2. This has a 25MHz chrystal next to it, so no
* clocking is needed.
*/
- ethernet-ebi2@2,0 {
+ ethernet@2,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
reg = <2 0x0 0x100>;
/*
@@ -598,8 +598,6 @@ ethernet-ebi2@2,0 {
phy-mode = "mii";
reg-io-width = <2>;
smsc,force-external-phy;
- /* IRQ on edge falling = active low */
- smsc,irq-active-low;
smsc,irq-push-pull;
/*
--
2.25.1
