[PATCH v3 16/17] crypto: qce: Defer probing if BAM dma channel is not yet initialized

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since the Qualcomm qce crypto driver needs the BAM dma driver to be
setup first (to allow crypto operations), it makes sense to defer
the qce crypto driver probing in case the BAM dma driver is not yet
probed.

Move the code leg requesting dma channels earlier in the
probe() flow. This fixes the qce probe failure issues when both qce
and BMA dma are compiled as static part of the kernel.

Cc: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
Cc: David S. Miller <davem@xxxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: dmaengine@xxxxxxxxxxxxxxx
Cc: linux-clk@xxxxxxxxxxxxxxx
Cc: linux-crypto@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: bhupesh.linux@xxxxxxxxx
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
 drivers/crypto/qce/core.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
index 8b3e2b4580c2..207221d5b996 100644
--- a/drivers/crypto/qce/core.c
+++ b/drivers/crypto/qce/core.c
@@ -218,6 +218,14 @@ static int qce_crypto_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_out;
 
+	/* qce driver requires BAM dma driver to be setup first.
+	 * In case the dma channel are not set yet, this check
+	 * helps use to return -EPROBE_DEFER earlier.
+	 */
+	ret = qce_dma_request(qce->dev, &qce->dma);
+	if (ret)
+		return ret;
+
 	qce->mem_path = devm_of_icc_get(qce->dev, "memory");
 	if (IS_ERR(qce->mem_path))
 		return dev_err_probe(dev, PTR_ERR(qce->mem_path),
@@ -269,10 +277,6 @@ static int qce_crypto_probe(struct platform_device *pdev)
 			goto err_clks_iface;
 	}
 
-	ret = qce_dma_request(qce->dev, &qce->dma);
-	if (ret)
-		goto err_clks;
-
 	ret = qce_check_version(qce);
 	if (ret)
 		goto err_clks;
@@ -287,12 +291,10 @@ static int qce_crypto_probe(struct platform_device *pdev)
 
 	ret = qce_register_algs(qce);
 	if (ret)
-		goto err_dma;
+		goto err_clks;
 
 	return 0;
 
-err_dma:
-	qce_dma_release(&qce->dma);
 err_clks:
 	clk_disable_unprepare(qce->bus);
 err_clks_iface:
-- 
2.31.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux