Re: [PATCH 1/2] clk: qcom: add support for SM8350 DISPCC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Jonathan,

Thanks for submitting this.

On Thu, 13 May 2021 at 21:56, Jonathan Marek <jonathan@xxxxxxxx> wrote:
>
> Add support to the SM8350 display clock controller by extending the SM8250
> display clock controller, which is almost identical but has some minor
> differences.
>
> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> ---
>  drivers/clk/qcom/Kconfig         |  4 +-
>  drivers/clk/qcom/dispcc-sm8250.c | 84 +++++++++++++++++++++++++++-----
>  2 files changed, 75 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 45646b867cdb..cc60e6ee1654 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -484,11 +484,11 @@ config SDX_GCC_55
>           SPI, I2C, USB, SD/UFS, PCIe etc.
>
>  config SM_DISPCC_8250
> -       tristate "SM8150 and SM8250 Display Clock Controller"
> +       tristate "SM8150/SM8250/SM8350 Display Clock Controller"
>         depends on SM_GCC_8150 || SM_GCC_8250
>         help
>           Support for the display clock controller on Qualcomm Technologies, Inc
> -         SM8150 and SM8250 devices.
> +         SM8150/SM8250/SM8350 devices.
>           Say Y if you want to support display devices and functionality such as
>           splash screen.
>
> diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> index de09cd5c209f..1fcf8085a109 100644
> --- a/drivers/clk/qcom/dispcc-sm8250.c
> +++ b/drivers/clk/qcom/dispcc-sm8250.c
> @@ -36,6 +36,10 @@ static struct pll_vco vco_table[] = {
>         { 249600000, 2000000000, 0 },
>  };
>
> +static struct pll_vco lucid_5lpe_vco[] = {
> +       { 249600000, 1750000000, 0 },
> +};
> +
>  static struct alpha_pll_config disp_cc_pll0_config = {
>         .l = 0x47,
>         .alpha = 0xE000,
> @@ -1039,6 +1043,7 @@ static const struct qcom_cc_desc disp_cc_sm8250_desc = {
>  static const struct of_device_id disp_cc_sm8250_match_table[] = {
>         { .compatible = "qcom,sm8150-dispcc" },
>         { .compatible = "qcom,sm8250-dispcc" },
> +       { .compatible = "qcom,sm8350-dispcc" },
>         { }
>  };
>  MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
> @@ -1051,19 +1056,76 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
>         if (IS_ERR(regmap))
>                 return PTR_ERR(regmap);
>
> -       /* note: trion == lucid, except for the prepare() op */
> -       BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
> -       if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {

I'm having a quick look at this patch, and of_device_is_compatible had
2 cases previously, sm8150 & sm8250. Now three cases (sm8150, sm8250 &
sm8350) are possible, but sm8150 & sm8250 have been lumped together.
Is this correct?

> -               disp_cc_pll0_config.config_ctl_hi_val = 0x00002267;
> -               disp_cc_pll0_config.config_ctl_hi1_val = 0x00000024;
> -               disp_cc_pll0_config.user_ctl_hi1_val = 0x000000D0;
> -               disp_cc_pll0_init.ops = &clk_alpha_pll_trion_ops;
> -               disp_cc_pll1_config.config_ctl_hi_val = 0x00002267;
> -               disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
> -               disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
> -               disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
> +       /* SM8350 has _SRC clocks offset by 4, and some other differences */
> +       if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
> +               static struct clk_rcg2* const rcgs[] = {
> +                       &disp_cc_mdss_byte0_clk_src,
> +                       &disp_cc_mdss_byte1_clk_src,
> +                       &disp_cc_mdss_dp_aux1_clk_src,
> +                       &disp_cc_mdss_dp_aux_clk_src,
> +                       &disp_cc_mdss_dp_link1_clk_src,
> +                       &disp_cc_mdss_dp_link_clk_src,
> +                       &disp_cc_mdss_dp_pixel1_clk_src,
> +                       &disp_cc_mdss_dp_pixel2_clk_src,
> +                       &disp_cc_mdss_dp_pixel_clk_src,
> +                       &disp_cc_mdss_esc0_clk_src,
> +                       &disp_cc_mdss_mdp_clk_src,
> +                       &disp_cc_mdss_pclk0_clk_src,
> +                       &disp_cc_mdss_pclk1_clk_src,
> +                       &disp_cc_mdss_rot_clk_src,
> +                       &disp_cc_mdss_vsync_clk_src,
> +               };
> +               static struct clk_regmap_div* const divs[] = {
> +                       &disp_cc_mdss_byte0_div_clk_src,
> +                       &disp_cc_mdss_byte1_div_clk_src,
> +                       &disp_cc_mdss_dp_link1_div_clk_src,
> +                       &disp_cc_mdss_dp_link_div_clk_src,
> +               };
> +               unsigned i;
> +               static bool offset_applied = false;
> +
> +               /* only apply the offsets once (in case of deferred probe) */
> +               if (!offset_applied) {
> +                       for (i = 0; i < ARRAY_SIZE(rcgs); i++)
> +                               rcgs[i]->cmd_rcgr -= 4;
> +
> +                       for (i = 0; i < ARRAY_SIZE(divs); i++) {
> +                               divs[i]->reg -= 4;
> +                               divs[i]->width = 4;
> +                       }
> +
> +                       disp_cc_mdss_ahb_clk.halt_reg -= 4;
> +                       disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
> +
> +                       offset_applied = true;
> +               }
> +
> +               disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
> +
> +               disp_cc_pll0_config.config_ctl_hi1_val = 0x2A9A699C;
> +               disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
> +               disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> +               disp_cc_pll0.vco_table = lucid_5lpe_vco;
> +               disp_cc_pll1_config.config_ctl_hi1_val = 0x2A9A699C;
> +               disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
> +               disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> +               disp_cc_pll1.vco_table = lucid_5lpe_vco;
> +       } else {
> +               /* note: trion == lucid, except for the prepare() op */
> +               BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
> +               if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
> +                       disp_cc_pll0_config.config_ctl_hi_val = 0x00002267;
> +                       disp_cc_pll0_config.config_ctl_hi1_val = 0x00000024;
> +                       disp_cc_pll0_config.user_ctl_hi1_val = 0x000000D0;
> +                       disp_cc_pll0_init.ops = &clk_alpha_pll_trion_ops;
> +                       disp_cc_pll1_config.config_ctl_hi_val = 0x00002267;
> +                       disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
> +                       disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
> +                       disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
> +               }
>         }
>
> +       /* note for SM8350: downstream lucid_5lpe configure differs slightly */
>         clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
>         clk_lucid_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
>
> --
> 2.26.1
>



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux