Re: [PATCH 2/4] drm/msm/dpu: Clear boot loader configured data paths

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 11 May 2021 at 07:18, Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> It's typical for the bootloader to configure CTL_0 for the boot splash
> or EFIFB, but for non-DSI use cases the DPU driver tend to pick another
> CTL and the system might end up with two configured data paths producing
> data on the same INTF - with resulting graphical artifacts.
>
> Naturally the end goal would be to inherit the bootloader's
> configuration and provide the user with a glitch free handover from the
> boot configuration to a running DPU.
> But such effort will affect clocks, regulators, power-domains etc, so in
> the meantime this patch simply disables all INTFs and clear all
> configured data paths, to avoid the graphical artifacts.

Good idea. We'd have to be careful to test this with interfaces in command mode.

>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c |  4 +++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c    |  2 ++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c     | 36 ++++++++++++++++++++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h     |  8 +++++
>  4 files changed, 50 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 2d4645e01ebf..7aba27c1055a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -349,9 +349,13 @@ static void dpu_hw_ctl_clear_all_blendstages(struct dpu_hw_ctl *ctx)
>                 DPU_REG_WRITE(c, CTL_LAYER_EXT(LM_0 + i), 0);
>                 DPU_REG_WRITE(c, CTL_LAYER_EXT2(LM_0 + i), 0);
>                 DPU_REG_WRITE(c, CTL_LAYER_EXT3(LM_0 + i), 0);
> +
> +               ctx->pending_flush_mask |= dpu_hw_ctl_get_bitmask_mixer(ctx, LM_0 + i);
>         }
>
>         DPU_REG_WRITE(c, CTL_FETCH_PIPE_ACTIVE, 0);
> +
> +       ctx->pending_flush_mask |= CTL_FLUSH_MASK_CTL;
>  }
>
>  static void dpu_hw_ctl_setup_blendstage(struct dpu_hw_ctl *ctx,
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 88e9cc38c13b..8b01cb660381 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -970,6 +970,8 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>
>         dpu_kms->rm_init = true;
>
> +       dpu_rm_clear_boot_config(&dpu_kms->rm, dpu_kms->catalog);
> +
>         dpu_kms->hw_mdp = dpu_hw_mdptop_init(MDP_TOP, dpu_kms->mmio,
>                                              dpu_kms->catalog);
>         if (IS_ERR(dpu_kms->hw_mdp)) {
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> index fd2d104f0a91..2cf47084482f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> @@ -4,6 +4,7 @@
>   */
>
>  #define pr_fmt(fmt)    "[drm:%s] " fmt, __func__
> +#include <linux/delay.h>
>  #include "dpu_kms.h"
>  #include "dpu_hw_lm.h"
>  #include "dpu_hw_ctl.h"
> @@ -229,6 +230,41 @@ int dpu_rm_init(struct dpu_rm *rm,
>         return rc ? rc : -EFAULT;
>  }
>
> +void dpu_rm_clear_boot_config(struct dpu_rm *rm, struct dpu_mdss_cfg *cat)
> +{
> +       struct dpu_hw_intf *intf;
> +       struct dpu_hw_ctl *ctl;
> +       int i;
> +
> +       for (i = INTF_0; i < INTF_MAX; i++) {
> +               if (!rm->intf_blks[i - INTF_0])
> +                       continue;
> +
> +               DPU_DEBUG("disabling intf%d timing engine\n", i - INTF_0);
> +
> +               intf = to_dpu_hw_intf(rm->intf_blks[i - INTF_0]);
> +               intf->ops.enable_timing(intf, 0);
> +       }
> +
> +       /*
> +        * Wait one frame for the INTF timing engine to stop, and then wait one
> +        * more frame, per the documentation.
> +        */
> +       msleep(32);
> +
> +       for (i = CTL_0; i < CTL_MAX; i++) {
> +               if (!rm->ctl_blks[i - CTL_0])
> +                       continue;
> +
> +               DPU_DEBUG("clearing ctl%d layer configuration\n", i - CTL_0);
> +
> +               ctl = to_dpu_hw_ctl(rm->ctl_blks[i - CTL_0]);
> +               ctl->ops.clear_all_blendstages(ctl);
> +               ctl->ops.trigger_flush(ctl);
> +               ctl->ops.trigger_start(ctl);
> +       }
> +}
> +
>  static bool _dpu_rm_needs_split_display(const struct msm_display_topology *top)
>  {
>         return top->num_intf > 1;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> index 1f12c8d5b8aa..53cd649614a3 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h
> @@ -88,5 +88,13 @@ void dpu_rm_release(struct dpu_global_state *global_state,
>  int dpu_rm_get_assigned_resources(struct dpu_rm *rm,
>         struct dpu_global_state *global_state, uint32_t enc_id,
>         enum dpu_hw_blk_type type, struct dpu_hw_blk **blks, int blks_size);
> +
> +/**
> + * dpu_rm_clear_boot_config() - Tear down any data paths configured by boot
> + * @rm: DPU Resource Manger handle
> + * @cat: Pointer to hardware catalog
> + */
> +void dpu_rm_clear_boot_config(struct dpu_rm *rm, struct dpu_mdss_cfg *cat);
> +
>  #endif /* __DPU_RM_H__ */
>
> --
> 2.29.2
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux